HTS 7229: Wire of other alloy steel
Heading 7229 of the Harmonized Tariff Schedule of the United States has 11 ten-digit statistical numbers. A US entry line in ACE needs the full ten digits, with the quantity in kg.
Check additional duties before you file
- Steel and aluminum articles here may carry Section 232 duties. The entry can need the Chapter 99 number, the metal value and the country where the metal was melted and poured, or smelted and cast.
- If the goods are made in China, check Section 301 duties under HTSUS heading 9903.88, on top of the general rate, and any exclusions.
| HTSUS number | Description | Unit | General rate |
|---|---|---|---|
| 7229.20.00 | Of silico-manganese steel | Free | |
| Round, with a diameter of less than or equal to 1.6 mm, containing by weight less than 0.20 percent of carbon, more than 0.9 percent of manganese, and more than 0.6 percent of silicon, and suitable for electric arc welding: | |||
| 7229.20.00.10 | Plated or coated with copper | kg | |
| 7229.20.00.15 | Other | kg | |
| 7229.20.00.90 | Other | kg | |
| 7229.90 | Other: | ||
| 7229.90.05.00 | Of high-speed steel | kg | Free |
| Other: | |||
| 7229.90.10.00 | Flat wire | kg | Free |
| 7229.90.50 | Round wire | Free | |
| With a diameter of less than or equal to 1.6 mm, containing by weight less than 0.20 percent of carbon and more than 0.3 percent of nickel or more than 0.08 percent of molybdenum, and suitable for electric arc welding: | |||
| 7229.90.50.06 | Plated or coated with copper | kg | |
| 7229.90.50.08 | Other | kg | |
| Other: | |||
| 7229.90.50.16 | With a diameter of less than 1.0 mm | kg | |
| 7229.90.50.31 | With a diameter of 1.0 mm or more but less than 1.5 mm | kg | |
| 7229.90.50.51 | With a diameter of 1.5 mm or more | kg | |
| 7229.90.90.00 | Other wire | kg | Free |
Common paperwork mistakes with heading 7229
- The invoice shows the exporter's own code. Only the first six digits are shared worldwide; the US number has ten. Check every line against the list above.
- The quantity is in the wrong unit. These lines report quantity in kg, which may not match the invoice's cartons, sets or pieces.
- The packing list and the bill of lading disagree on cartons or gross weight, which can lead to holds and exams.
- The manufacturer's name and address are missing, so the MID cannot be built from the documents.
Look up any ten-digit number, or read the guide to invoice and packing list mismatches.
Check the whole shipment, not one number
FreightProof reads the invoice, packing list and bill of lading together, validates every HTS number and container, builds the MIDs and flags what does not match — in about two minutes.
Data: Harmonized Tariff Schedule of the United States, US International Trade Commission. Rates are for information only.