HTS 7228: Other bars and rods of other alloy steel; angles, shapes and sections, of other alloy steel; hollow drill bars and rods, of alloy or nonalloy steel
Heading 7228 of the Harmonized Tariff Schedule of the United States has 35 ten-digit statistical numbers. A US entry line in ACE needs the full ten digits, with the quantity in kg.
Check additional duties before you file
- Steel and aluminum articles here may carry Section 232 duties. The entry can need the Chapter 99 number, the metal value and the country where the metal was melted and poured, or smelted and cast.
- If the goods are made in China, check Section 301 duties under HTSUS heading 9903.88, on top of the general rate, and any exclusions.
| HTSUS number | Description | Unit | General rate |
|---|---|---|---|
| 7228.10.00 | Bars and rods, of high-speed steel | Free | |
| 7228.10.00.10 | Not cold-formed | kg | |
| Cold-formed: | |||
| 7228.10.00.30 | With a maximum cross-sectional dimension of less than 18 mm | kg | |
| 7228.10.00.60 | With a maximum cross-sectional dimension of 18 mm or more | kg | |
| 7228.20 | Bars and rods, of silico-manganese steel: | ||
| 7228.20.10.00 | Not cold-formed | kg | Free |
| 7228.20.50.00 | Cold-formed | kg | Free |
| Other bars and rods, not further worked than hot-rolled, hot-drawn or extruded: | |||
| 7228.30 | Of tool steel (other than high-speed steel): | ||
| 7228.30.20.00 | Of ball-bearing steel | kg | Free |
| 7228.30.40.00 | Of chipper knife steel, not cold-formed | kg | Free |
| 7228.30.60.00 | Other | kg | Free |
| 7228.30.80 | Other | Free | |
| 7228.30.80.05 | Of high-nickel alloy steel | kg | |
| 7228.30.80.10 | Concrete reinforcing bars and rods | kg | |
| Other: | |||
| 7228.30.80.15 | With a diameter or cross section measuring less than 76 mm | kg | |
| 7228.30.80.41 | With a diameter or cross section measuring 76 mm or more but not exceeding 152 mm | kg | |
| 7228.30.80.45 | With a diameter or cross section measuring 152 mm or more but not exceeding 228 mm | kg | |
| 7228.30.80.70 | With a diameter or cross section exceeding 228 mm | kg | |
| 7228.40.00.00 | Other bars and rods, not further worked than forged | kg | Free |
| 7228.50 | Other bars and rods, not further worked than cold-formed or cold-finished: | ||
| 7228.50.10 | Of tool steel (other than high-speed steel) | Free | |
| 7228.50.10.10 | Of ball-bearing steel | kg | |
| Other: | |||
| With a maximum cross-sectional dimension of less than 18 mm: | |||
| 7228.50.10.20 | Of round or rectangular cross section with surfaces ground, milled or polished | kg | |
| 7228.50.10.40 | Other | kg | |
| With a maximum cross-sectional dimension of 18 mm or more: | |||
| 7228.50.10.60 | Of round or rectangular cross section with surfaces ground, milled or polished | kg | |
| 7228.50.10.80 | Other | kg | |
| 7228.50.50 | Other | Free | |
| 7228.50.50.05 | Of high-nickel alloy steel | kg | |
| Other: | |||
| 7228.50.50.15 | With a diameter or cross section measuring less than 76 mm | kg | |
| 7228.50.50.40 | With a diameter or cross section measuring 76 mm or more but not exceeding 228 mm | kg | |
| 7228.50.50.70 | With a diameter or cross section exceeding 228 mm | kg | |
| 7228.60 | Other bars and rods: | ||
| 7228.60.10 | Of tool steel (other than high-speed steel) | Free | |
| 7228.60.10.30 | Of ball-bearing steel | kg | |
| 7228.60.10.60 | Other | kg | |
| Other: | |||
| 7228.60.60.00 | Not cold-formed | kg | Free |
| 7228.60.80.00 | Cold-formed | kg | Free |
| 7228.70 | Angles, shapes and sections: | ||
| 7228.70.30 | Hot-rolled, not drilled, not punched and not otherwise advanced | Free | |
| 7228.70.30.10 | U, I, H and T sections | kg | |
| Other: | |||
| With a maximum cross-sectional dimension of 76 mm or more: | |||
| 7228.70.30.20 | Angles | kg | |
| 7228.70.30.41 | Other | kg | |
| With a maximum cross-sectional dimension of less than 76 mm: | |||
| 7228.70.30.60 | Angles | kg | |
| 7228.70.30.81 | Other | kg | |
| 7228.70.60.00 | Other | kg | Free |
| 7228.80.00.00 | Hollow drill bars and rods | kg | Free |
Common paperwork mistakes with heading 7228
- The invoice shows the exporter's own code. Only the first six digits are shared worldwide; the US number has ten. Check every line against the list above.
- The quantity is in the wrong unit. These lines report quantity in kg, which may not match the invoice's cartons, sets or pieces.
- The packing list and the bill of lading disagree on cartons or gross weight, which can lead to holds and exams.
- The manufacturer's name and address are missing, so the MID cannot be built from the documents.
Look up any ten-digit number, or read the guide to invoice and packing list mismatches.
Check the whole shipment, not one number
FreightProof reads the invoice, packing list and bill of lading together, validates every HTS number and container, builds the MIDs and flags what does not match — in about two minutes.
Data: Harmonized Tariff Schedule of the United States, US International Trade Commission. Rates are for information only.