HTS 7226: Flat-rolled products of other alloy steel, of a width of less than 600 mm
Heading 7226 of the Harmonized Tariff Schedule of the United States has 26 ten-digit statistical numbers. A US entry line in ACE needs the full ten digits, with the quantity in kg.
Check additional duties before you file
- Steel and aluminum articles here may carry Section 232 duties. The entry can need the Chapter 99 number, the metal value and the country where the metal was melted and poured, or smelted and cast.
- If the goods are made in China, check Section 301 duties under HTSUS heading 9903.88, on top of the general rate, and any exclusions.
| HTSUS number | Description | Unit | General rate |
|---|---|---|---|
| Of silicon electrical steel: | |||
| 7226.11 | Grain-oriented: | ||
| 7226.11.10.00 | Of a width of 300 mm or more | kg | Free |
| 7226.11.90 | Of a width of less than 300 mm | Free | |
| 7226.11.90.30 | Of thickness not exceeding 0.25 mm | kg | |
| 7226.11.90.60 | Other | kg | |
| 7226.19 | Other: | ||
| 7226.19.10.00 | Of a width of 300 mm or more | kg | Free |
| 7226.19.90.00 | Of a width of less than 300 mm | kg | Free |
| 7226.20.00.00 | Of high-speed steel | kg | Free |
| Other: | |||
| 7226.91 | Not further worked than hot-rolled: | ||
| Of tool steel (other than high-speed steel): | |||
| 7226.91.05.00 | Of chipper knife steel | kg | Free |
| Other: | |||
| 7226.91.15 | Of a width of 300 mm or more | Free | |
| 7226.91.15.30 | Of ball-bearing steel | kg | |
| 7226.91.15.60 | Other | kg | |
| 7226.91.25 | Of a width of less than 300 mm | Free | |
| 7226.91.25.30 | Of ball-bearing steel | kg | |
| 7226.91.25.60 | Other | kg | |
| Other: | |||
| 7226.91.50.00 | Of a thickness of 4.75 mm or more | kg | Free |
| Of a thickness of less than 4.75 mm: | |||
| 7226.91.70.00 | Of a width of 300 mm or more | kg | Free |
| 7226.91.80.00 | Of a width of less than 300 mm | kg | Free |
| 7226.92 | Not further worked than cold-rolled (cold-reduced): | ||
| Of tool steel (other than high-speed steel): | |||
| 7226.92.10 | Of a width of 300 mm or more | Free | |
| 7226.92.10.30 | Of ball-bearing steel | kg | |
| 7226.92.10.60 | Other | kg | |
| 7226.92.30 | Of a width of less than 300 mm | Free | |
| 7226.92.30.30 | Of ball-bearing steel | kg | |
| 7226.92.30.60 | Other | kg | |
| Other: | |||
| 7226.92.50.00 | Of a width of 300 mm or more | kg | Free |
| Of a width of less than 300 mm: | |||
| 7226.92.70 | Of a thickness not exceeding 0.25 mm | Free | |
| 7226.92.70.05 | Of high-nickel alloy steel | kg | |
| 7226.92.70.50 | Other | kg | |
| 7226.92.80 | Of a thickness exceeding 0.25 mm | Free | |
| 7226.92.80.05 | Of high-nickel alloy steel | kg | |
| 7226.92.80.50 | Other | kg | |
| 7226.99.01 | Other | Free | |
| 7226.99.01.10 | Electrolytically plated or coated with zinc | kg | |
| 7226.99.01.30 | Otherwise plated or coated with zinc | kg | |
| 7226.99.01.80 | Other | kg |
Common paperwork mistakes with heading 7226
- The invoice shows the exporter's own code. Only the first six digits are shared worldwide; the US number has ten. Check every line against the list above.
- The quantity is in the wrong unit. These lines report quantity in kg, which may not match the invoice's cartons, sets or pieces.
- The packing list and the bill of lading disagree on cartons or gross weight, which can lead to holds and exams.
- The manufacturer's name and address are missing, so the MID cannot be built from the documents.
Look up any ten-digit number, or read the guide to invoice and packing list mismatches.
Check the whole shipment, not one number
FreightProof reads the invoice, packing list and bill of lading together, validates every HTS number and container, builds the MIDs and flags what does not match — in about two minutes.
Data: Harmonized Tariff Schedule of the United States, US International Trade Commission. Rates are for information only.