HTS 7222: Other bars and rods of stainless steel; angles, shapes and sections of stainless steel
Heading 7222 of the Harmonized Tariff Schedule of the United States has 31 ten-digit statistical numbers. A US entry line in ACE needs the full ten digits, with the quantity in kg.
Check additional duties before you file
- Steel and aluminum articles here may carry Section 232 duties. The entry can need the Chapter 99 number, the metal value and the country where the metal was melted and poured, or smelted and cast.
- If the goods are made in China, check Section 301 duties under HTSUS heading 9903.88, on top of the general rate, and any exclusions.
| HTSUS number | Description | Unit | General rate |
|---|---|---|---|
| Bars and rods, not further worked than hot-rolled, hot-drawn or extruded: | |||
| 7222.11.00 | Of circular cross-section | Free | |
| 7222.11.00.01 | Electroslag or vacuum arc remelted | kg | |
| 7222.11.00.06 | Of high-nickel alloy steel | kg | |
| Other: | |||
| With a maximum cross-sectional dimension of less than 152.4 mm: | |||
| 7222.11.00.57 | Containing less than 8 percent by weight of nickel | kg | |
| 7222.11.00.59 | Containing 8 percent or more but less than 24 percent by weight of nickel | kg | |
| With a maximum cross-sectional dimension of 152.4 mm or more: | |||
| 7222.11.00.82 | Containing less than 8 percent by weight of nickel | kg | |
| 7222.11.00.84 | Containing 8 percent or more but less than 24 percent by weight of nickel | kg | |
| 7222.19.00 | Other | Free | |
| 7222.19.00.01 | Electroslag or vacuum arc remelted | kg | |
| Other: | |||
| 7222.19.00.06 | Of high-nickel alloy steel | kg | |
| Other: | |||
| 7222.19.00.52 | Containing less than 8 percent by weight of nickel | kg | |
| 7222.19.00.54 | Containing 8 percent or more but less than 24 percent by weight of nickel | kg | |
| 7222.20.00 | Bars and rods, not further worked than cold-formed or cold-finished | Free | |
| 7222.20.00.01 | Electroslag or vacuum arc remelted | kg | |
| 7222.20.00.06 | Of high-nickel alloy steel | kg | |
| Other: | |||
| Of a circular cross-section: | |||
| With a maximum circular cross-sectional dimension of less than 18 mm: | |||
| 7222.20.00.41 | Containing less than 8 percent by weight of nickel | kg | |
| 7222.20.00.43 | Containing 8 percent or more but less than 24 percent by weight of nickel | kg | |
| With a maximum circular cross-sectional dimension of 18 mm or more and less than 152.4 mm: | |||
| 7222.20.00.62 | Containing less than 8 percent by weight of nickel | kg | |
| 7222.20.00.64 | Containing 8 percent or more but less than 24 percent by weight of nickel | kg | |
| With a maximum circular cross-sectional dimension of 152.4 mm or more: | |||
| 7222.20.00.67 | Containing less than 8 percent by weight of nickel | kg | |
| 7222.20.00.69 | Containing 8 percent or more but less than 24 percent by weight of nickel | kg | |
| Other: | |||
| 7222.20.00.71 | Containing less than 8 percent by weight of nickel | kg | |
| 7222.20.00.73 | Containing 8 percent or more but less than 24 percent by weight of nickel | kg | |
| 7222.30.00 | Other bars and rods | Free | |
| 7222.30.00.01 | Electroslag or vacuum arc remelted | kg | |
| 7222.30.00.12 | Of high-nickel alloy steel | kg | |
| Other: | |||
| With a maximum cross-sectional dimension of less than 152.4 mm: | |||
| 7222.30.00.22 | Containing less than 8 percent by weight of nickel | kg | |
| 7222.30.00.24 | Containing 8 percent or more but less than 24 percent by weight of nickel | kg | |
| With a maximum cross-sectional dimension of 152.4 mm or more: | |||
| 7222.30.00.82 | Containing less than 8 percent by weight of nickel | kg | |
| 7222.30.00.84 | Containing 8 percent or more but less than 24 percent by weight of nickel | kg | |
| 7222.40 | Angles, shapes and sections: | ||
| 7222.40.30 | Hot-rolled, not drilled, not punched and not otherwise advanced | Free | |
| With a maximum cross-sectional dimension of 80 mm or more: | |||
| 7222.40.30.25 | Angles | kg | |
| 7222.40.30.45 | Other | kg | |
| With a maximum cross-sectional dimension of less than 80 mm: | |||
| 7222.40.30.65 | Angles | kg | |
| 7222.40.30.85 | Other | kg | |
| 7222.40.60.00 | Other | kg | Free |
Common paperwork mistakes with heading 7222
- The invoice shows the exporter's own code. Only the first six digits are shared worldwide; the US number has ten. Check every line against the list above.
- The quantity is in the wrong unit. These lines report quantity in kg, which may not match the invoice's cartons, sets or pieces.
- The packing list and the bill of lading disagree on cartons or gross weight, which can lead to holds and exams.
- The manufacturer's name and address are missing, so the MID cannot be built from the documents.
Look up any ten-digit number, or read the guide to invoice and packing list mismatches.
Check the whole shipment, not one number
FreightProof reads the invoice, packing list and bill of lading together, validates every HTS number and container, builds the MIDs and flags what does not match — in about two minutes.
Data: Harmonized Tariff Schedule of the United States, US International Trade Commission. Rates are for information only.