HTS 7220: Flat-rolled products of stainless steel, of a width of less than 600 mm

Heading 7220 of the Harmonized Tariff Schedule of the United States has 24 ten-digit statistical numbers. A US entry line in ACE needs the full ten digits, with the quantity in kg.

Check additional duties before you file

Steel and aluminum articles here may carry Section 232 duties. The entry can need the Chapter 99 number, the metal value and the country where the metal was melted and poured, or smelted and cast.
If the goods are made in China, check Section 301 duties under HTSUS heading 9903.88, on top of the general rate, and any exclusions.

HTSUS number	Description	Unit	General rate
	Not further worked than hot-rolled:
7220.11.00.00	Of a thickness of 4.75 mm or more	kg	Free
7220.12	Of a thickness of less than 4.75 mm:
7220.12.10.00	Of a width of 300 mm or more	kg	Free
7220.12.50.00	Of a width of less than 300 mm	kg	Free
7220.20	Not further worked than cold-rolled (cold-reduced):
7220.20.10	Of a width of 300 mm or more		Free
	Containing more than 0.5 percent but less than 24 percent by weight of nickel:
7220.20.10.10	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	kg
7220.20.10.15	Other	kg
	Other:
7220.20.10.60	Containing less than 15 percent by weight of chromium	kg
7220.20.10.80	Other	kg
	Of a width of less than 300 mm:
7220.20.60	Of a thickness exceeding 1.25 mm		Free
7220.20.60.05	Of high-nickel alloy steel	kg
	Other:
	Containing more than 0.5 percent by weight of nickel:
7220.20.60.10	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	kg
7220.20.60.15	Other	kg
	Other:
7220.20.60.60	Containing less than 15 percent by weight of chromium	kg
7220.20.60.80	Other	kg
7220.20.70	Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm		Free
7220.20.70.05	Of high-nickel alloy steel	kg
	Other:
	Containing more than 0.5 percent by weight of nickel:
7220.20.70.10	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	kg
7220.20.70.15	Other	kg
	Other:
7220.20.70.60	Containing less than 15 percent by weight of chromium	kg
7220.20.70.80	Other	kg
	Of a thickness not exceeding 0.25 mm:
7220.20.80.00	Razor blade steel	kg	Free
7220.20.90	Other		Free
7220.20.90.30	Containing more than 0.5 percent but less than 24 percent by weight of nickel	kg
7220.20.90.60	Other	kg
7220.90.00	Other		Free
	Containing more than 0.5 percent but less than 24 percent by weight of nickel:
7220.90.00.10	Containing more than 1.5 percent but less than 5 percent by weight of molybdenum	kg
7220.90.00.15	Other	kg
	Other:
7220.90.00.60	Containing less than 15 percent by weight of chromium	kg
7220.90.00.80	Other	kg

Common paperwork mistakes with heading 7220

The invoice shows the exporter's own code. Only the first six digits are shared worldwide; the US number has ten. Check every line against the list above.
The quantity is in the wrong unit. These lines report quantity in kg, which may not match the invoice's cartons, sets or pieces.
The packing list and the bill of lading disagree on cartons or gross weight, which can lead to holds and exams.
The manufacturer's name and address are missing, so the MID cannot be built from the documents.

Look up any ten-digit number, or read the guide to invoice and packing list mismatches.

Check the whole shipment, not one number

FreightProof reads the invoice, packing list and bill of lading together, validates every HTS number and container, builds the MIDs and flags what does not match — in about two minutes.

Check a shipment free — no signup See a sample report

Data: Harmonized Tariff Schedule of the United States, US International Trade Commission. Rates are for information only.