HTS 7211: Flat-rolled products of iron or nonalloy steel, of a width of less than 600 mm, not clad, plated or coated
Heading 7211 of the Harmonized Tariff Schedule of the United States has 25 ten-digit statistical numbers. A US entry line in ACE needs the full ten digits, with the quantity in kg.
Check additional duties before you file
- Steel and aluminum articles here may carry Section 232 duties. The entry can need the Chapter 99 number, the metal value and the country where the metal was melted and poured, or smelted and cast.
- If the goods are made in China, check Section 301 duties under HTSUS heading 9903.88, on top of the general rate, and any exclusions.
| HTSUS number | Description | Unit | General rate |
|---|---|---|---|
| Not further worked than hot-rolled: | |||
| 7211.13.00.00 | Universal mill plate | kg | Free |
| 7211.14.00 | Other, of a thickness of 4.75 mm or more | Free | |
| 7211.14.00.30 | Of high-strength steel | kg | |
| Other: | |||
| 7211.14.00.45 | Not in coils | kg | |
| 7211.14.00.90 | Other | kg | |
| 7211.19 | Other: | ||
| Of a width of less than 300 mm: | |||
| 7211.19.15.00 | Of high-strength steel | kg | Free |
| Other: | |||
| 7211.19.20.00 | Of a thickness exceeding 1.25 mm | kg | Free |
| 7211.19.30.00 | Other | kg | Free |
| Other: | |||
| 7211.19.45.00 | Of high-strength steel | kg | Free |
| Other: | |||
| 7211.19.60.00 | Pickled | kg | Free |
| 7211.19.75 | Other | Free | |
| In coils: | |||
| 7211.19.75.30 | With untrimmed edges | kg | |
| 7211.19.75.60 | Other | kg | |
| 7211.19.75.90 | Other | kg | |
| Not further worked than cold-rolled (cold-reduced): | |||
| 7211.23 | Containing by weight less than 0.25 percent of carbon: | ||
| Of a width of less than 300 mm: | |||
| Of a thickness exceeding 1.25 mm: | |||
| 7211.23.15.00 | Of high-strength steel | kg | Free |
| 7211.23.20.00 | Other | kg | Free |
| 7211.23.30.00 | Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm | kg | Free |
| 7211.23.45.00 | Of a thickness not exceeding 0.25 mm | kg | Free |
| 7211.23.60 | Other | Free | |
| 7211.23.60.30 | Of a thickness exceeding 1.25 mm | kg | |
| 7211.23.60.60 | Of a thickness exceeding 0.25 mm but not exceeding 1.25 mm | kg | |
| 7211.23.60.90 | Of a thickness not exceeding 0.25 mm: | kg | |
| 7211.29 | Other: | ||
| Of a width of less than 300 mm: | |||
| 7211.29.20 | Of a thickness exceeding 0.25 mm | Free | |
| 7211.29.20.30 | Of a width less than 51 mm, in coils | kg | |
| 7211.29.20.90 | Other | kg | |
| 7211.29.45.00 | Other | kg | Free |
| 7211.29.60 | Other | Free | |
| 7211.29.60.30 | Of a thickness exceeding 1.25 mm | kg | |
| 7211.29.60.80 | Other | kg | |
| 7211.90.00.00 | Other | kg | Free |
Common paperwork mistakes with heading 7211
- The invoice shows the exporter's own code. Only the first six digits are shared worldwide; the US number has ten. Check every line against the list above.
- The quantity is in the wrong unit. These lines report quantity in kg, which may not match the invoice's cartons, sets or pieces.
- The packing list and the bill of lading disagree on cartons or gross weight, which can lead to holds and exams.
- The manufacturer's name and address are missing, so the MID cannot be built from the documents.
Look up any ten-digit number, or read the guide to invoice and packing list mismatches.
Check the whole shipment, not one number
FreightProof reads the invoice, packing list and bill of lading together, validates every HTS number and container, builds the MIDs and flags what does not match — in about two minutes.
Data: Harmonized Tariff Schedule of the United States, US International Trade Commission. Rates are for information only.