HTS 7210: Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, clad, plated or coated
Heading 7210 of the Harmonized Tariff Schedule of the United States has 21 ten-digit statistical numbers. A US entry line in ACE needs the full ten digits, with the quantity in kg.
Check additional duties before you file
- Goods under this heading are often covered by antidumping or countervailing duty orders (corrosion-resistant steel). Confirm scope, country and manufacturer in CBP's AD/CVD case search. A missing case number is a common reason for penalties.
- Steel and aluminum articles here may carry Section 232 duties. The entry can need the Chapter 99 number, the metal value and the country where the metal was melted and poured, or smelted and cast.
- If the goods are made in China, check Section 301 duties under HTSUS heading 9903.88, on top of the general rate, and any exclusions.
| HTSUS number | Description | Unit | General rate |
|---|---|---|---|
| Plated or coated with tin: | |||
| 7210.11.00.00 | Of a thickness of 0.5 mm or more | kg | Free |
| 7210.12.00.00 | Of a thickness of less than 0.5 mm | kg | Free |
| 7210.20.00.00 | Plated or coated with lead, including terne-plate | kg | Free |
| 7210.30.00 | Electrolytically plated or coated with zinc | Free | |
| 7210.30.00.30 | Of high-strength steel | kg | |
| 7210.30.00.60 | Other | kg | |
| Otherwise plated or coated with zinc: | |||
| 7210.41.00.00 | Corrugated | kg | Free |
| 7210.49.00 | Other | Free | |
| Of high-strength steel: | |||
| 7210.49.00.40 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | kg | |
| 7210.49.00.45 | Other | kg | |
| Other: | |||
| 7210.49.00.91 | Of a thickness of 0.4 mm or more | kg | |
| 7210.49.00.95 | Other | kg | |
| 7210.50.00 | Plated or coated with chromium oxides or with chromium and chromium oxides | Free | |
| 7210.50.00.20 | Of a width less than 1050 mm | kg | |
| 7210.50.00.90 | Other | kg | |
| Plated or coated with aluminum: | |||
| 7210.61.00.00 | Plated or coated with aluminum-zinc alloys | kg | Free |
| 7210.69.00.00 | Other | kg | Free |
| 7210.70 | Painted, varnished or coated with plastics: | ||
| 7210.70.30.00 | Not coated or plated with metal and not clad | kg | Free |
| 7210.70.60 | Other | Free | |
| Zinc coated or plated: | |||
| 7210.70.60.30 | Electrolytically coated or plated | kg | |
| 7210.70.60.60 | Other | kg | |
| 7210.70.60.90 | Other | kg | |
| 7210.90 | Other: | ||
| 7210.90.10.00 | Clad | kg | Free |
| Other: | |||
| 7210.90.60.00 | Electrolytically coated or plated with base metal | kg | Free |
| 7210.90.90.00 | Other | kg | Free |
Common paperwork mistakes with heading 7210
- The invoice shows the exporter's own code. Only the first six digits are shared worldwide; the US number has ten. Check every line against the list above.
- The quantity is in the wrong unit. These lines report quantity in kg, which may not match the invoice's cartons, sets or pieces.
- The packing list and the bill of lading disagree on cartons or gross weight, which can lead to holds and exams.
- The manufacturer's name and address are missing, so the MID cannot be built from the documents.
Look up any ten-digit number, or read the guide to invoice and packing list mismatches.
Check the whole shipment, not one number
FreightProof reads the invoice, packing list and bill of lading together, validates every HTS number and container, builds the MIDs and flags what does not match — in about two minutes.
Data: Harmonized Tariff Schedule of the United States, US International Trade Commission. Rates are for information only.