HTS 7005: Float glass and surface ground or polished glass, in sheets, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked
Heading 7005 of the Harmonized Tariff Schedule of the United States has 15 ten-digit statistical numbers. A US entry line in ACE needs the full ten digits, with the quantity in m2.
Check additional duties before you file
- If the goods are made in China, check Section 301 duties under HTSUS heading 9903.88, on top of the general rate, and any exclusions.
| HTSUS number | Description | Unit | General rate |
|---|---|---|---|
| 7005.10 | Nonwired glass, having an absorbent, reflecting or non-reflecting layer: | ||
| 7005.10.40.00 | Suitable for use in liquid crystal displays, measuring not over 1.2 mm in thickness and not over 0.8 m2 in area | m2 | Free |
| 7005.10.80.00 | Other | m2 | 4.4% |
| Other nonwired glass: | |||
| 7005.21 | Colored throughout the mass (body tinted), opacified, flashed or merely surface ground: | ||
| 7005.21.10 | Measuring less than 10 mm in thickness | 14.5¢/m2 + 0.4% | |
| 7005.21.10.10 | Measuring less than 5 mm in thickness | m2 | |
| 7005.21.10.30 | Measuring 5 mm or more but less than 10 mm in thickness | m2 | |
| 7005.21.20.00 | Measuring 10 mm or more in thickness | m2 | 5.6% |
| 7005.29 | Other: | ||
| Measuring less than 10 mm in thickness: | |||
| Measuring not over 0.65 m in area: | |||
| 7005.29.04 | Suitable for use in liquid crystal displays | Free | |
| 7005.29.04.10 | Measuring not over 0.26 m2 in area | m2 | |
| 7005.29.04.50 | Measuring over 0.26 m2 but not over 0.65 m2 in area | m2 | |
| 7005.29.08 | Other | 18.7¢/m2 | |
| 7005.29.08.10 | Measuring not over 0.26 m2 in area | m2 | |
| 7005.29.08.50 | Measuring over 0.26 m2 but not over 0.65 m2 in area | m2 | |
| Measuring over 0.65 m2 in area: | |||
| 7005.29.14 | Suitable for use in liquid crystal displays, measuring not over 0.8 m2 in area | Free | |
| 7005.29.14.10 | Measuring less than 5 mm in thickness | m2 | |
| 7005.29.14.50 | Measuring 5 mm or more but less than 10 mm in thickness | m2 | |
| 7005.29.18 | Other | 14.5¢/m2 | |
| 7005.29.18.10 | Measuring less than 5 mm in thickness | m2 | |
| 7005.29.18.50 | Measuring 5 mm or more but less than 10 mm in thickness | m2 | |
| 7005.29.25.00 | Measuring 10 mm or more in thickness | m2 | 4.9% |
| 7005.30.00.00 | Wired glass | m2 | 29.1¢/m2 |
Common paperwork mistakes with heading 7005
- The invoice shows the exporter's own code. Only the first six digits are shared worldwide; the US number has ten. Check every line against the list above.
- The quantity is in the wrong unit. These lines report quantity in m2, which may not match the invoice's cartons, sets or pieces.
- The packing list and the bill of lading disagree on cartons or gross weight, which can lead to holds and exams.
- The manufacturer's name and address are missing, so the MID cannot be built from the documents.
Look up any ten-digit number, or read the guide to invoice and packing list mismatches.
Check the whole shipment, not one number
FreightProof reads the invoice, packing list and bill of lading together, validates every HTS number and container, builds the MIDs and flags what does not match — in about two minutes.
Data: Harmonized Tariff Schedule of the United States, US International Trade Commission. Rates are for information only.