HTS 7004: Drawn glass and blown glass, in sheets, whether or not having an absorbent, reflecting or non-reflecting layer, but not otherwise worked
Heading 7004 of the Harmonized Tariff Schedule of the United States has 16 ten-digit statistical numbers. A US entry line in ACE needs the full ten digits, with the quantity in m2 or m2/kg.
Check additional duties before you file
- If the goods are made in China, check Section 301 duties under HTSUS heading 9903.88, on top of the general rate, and any exclusions.
| HTSUS number | Description | Unit | General rate |
|---|---|---|---|
| 7004.20 | Glass, colored throughout the mass (body tinted), opacified, flashed or having an absorbent, reflecting or non-reflecting layer: | ||
| 7004.20.10.00 | Having an absorbent, reflecting or non-reflecting layer | m2 | Free |
| Other: | |||
| 7004.20.20 | In rectangular shape | 1¢/kg + 1.6% | |
| 7004.20.20.10 | Measuring less than 5 mm in thickness | m2/kg | |
| 7004.20.20.20 | Measuring 5 mm and over in thickness | m2/kg | |
| 7004.20.50.00 | Other | m2 | 7.2% |
| 7004.90 | Other glass: | ||
| In rectangular shape: | |||
| Measuring not over 1.5 mm in thickness: | |||
| 7004.90.05.00 | Measuring not over 0.26 m2 in area | m2/kg | Free |
| 7004.90.10.00 | Measuring over 0.26 m2 in area | m2/kg | Free |
| Measuring over 1.5 but not over 2 mm in thickness: | |||
| 7004.90.15.00 | Measuring not over 0.26 m2 in area | m2/kg | Free |
| 7004.90.20.00 | Measuring over 0.26 m2 in area | m2/kg | Free |
| 7004.90.25 | Measuring over 2 but not over 3.5 mm in thickness | 0.7¢/kg | |
| 7004.90.25.10 | Measuring not over 0.26 m2 in area | m2/kg | |
| 7004.90.25.20 | Measuring over 0.26 but not over 0.58 m2 in area | m2/kg | |
| 7004.90.25.50 | Measuring over 0.58 m2 in area | m2/kg | |
| Measuring over 3.5 mm in thickness: | |||
| 7004.90.30 | Measuring not over 0.65 m2 in area | Free | |
| Measuring not over 0.26 m2 in area: | |||
| 7004.90.30.10 | Measuring over 3.5 but not over 5 mm in thickness | m2/kg | |
| 7004.90.30.20 | Measuring over 5 mm in thickness | m2/kg | |
| 7004.90.30.50 | Measuring over 0.26 but not over 0.65 m2 in area | m2/kg | |
| 7004.90.40.00 | Measuring over 0.65 m2 in area | m2/kg | Free |
| 7004.90.50.00 | Other | m2 | 5% |
Common paperwork mistakes with heading 7004
- The invoice shows the exporter's own code. Only the first six digits are shared worldwide; the US number has ten. Check every line against the list above.
- The quantity is in the wrong unit. These lines report quantity in m2 or m2/kg, which may not match the invoice's cartons, sets or pieces.
- The packing list and the bill of lading disagree on cartons or gross weight, which can lead to holds and exams.
- The manufacturer's name and address are missing, so the MID cannot be built from the documents.
Look up any ten-digit number, or read the guide to invoice and packing list mismatches.
Check the whole shipment, not one number
FreightProof reads the invoice, packing list and bill of lading together, validates every HTS number and container, builds the MIDs and flags what does not match — in about two minutes.
Data: Harmonized Tariff Schedule of the United States, US International Trade Commission. Rates are for information only.