HTS 9606: Buttons, press-fasteners, snap-fasteners and press-studs, button molds and other parts of these articles; button blanks
Heading 9606 of the Harmonized Tariff Schedule of the United States has 11 ten-digit statistical numbers. A US entry line in ACE needs the full ten digits, with the quantity in gross or gross/gr.lines.
Check additional duties before you file
- If the goods are made in China, check Section 301 duties under HTSUS heading 9903.88, on top of the general rate, and any exclusions.
| HTSUS number | Description | Unit | General rate |
|---|---|---|---|
| 9606.10 | Press-fasteners, snap-fasteners and press-studs and parts thereof: | ||
| 9606.10.40.00 | Valued not over 20¢ per dozen pieces or parts | gross | 3.5% |
| 9606.10.80.00 | Valued over 20¢ per dozen pieces or parts | gross | 2.7% |
| Buttons: | |||
| 9606.21 | Of plastics, not covered with textile material: | ||
| 9606.21.20.00 | Of casein | gross | Free |
| 9606.21.40.00 | Of acrylic resin, of polyester resin or of both such resins | gross/gr.lines | 0.3¢/line/ gross + 4.6% |
| 9606.21.60.00 | Other | gross | 4.7% |
| 9606.22.00.00 | Of base metal, not covered with textile material | gross | Free |
| 9606.29 | Other: | ||
| 9606.29.20.00 | Of acrylic resin, of polyester resin or of both such resins, covered with textile material | gross/gr.lines | 0.3¢/line/ gross + 4.5% |
| Other: | |||
| 9606.29.40.00 | Of pearl or shell | gross/gr.lines | 0.18¢/line/ gross + 2.5% |
| 9606.29.60.00 | Other | gross | 2.9% |
| 9606.30 | Button molds and other parts of buttons; button blanks: | ||
| 9606.30.40.00 | Button blanks of casein | gross | Free |
| 9606.30.80.00 | Other | gross | 6% |
Common paperwork mistakes with heading 9606
- The invoice shows the exporter's own code. Only the first six digits are shared worldwide; the US number has ten. Check every line against the list above.
- The quantity is in the wrong unit. These lines report quantity in gross or gross/gr.lines, which may not match the invoice's cartons, sets or pieces.
- The packing list and the bill of lading disagree on cartons or gross weight, which can lead to holds and exams.
- The manufacturer's name and address are missing, so the MID cannot be built from the documents.
Look up any ten-digit number, or read the guide to invoice and packing list mismatches.
Check the whole shipment, not one number
FreightProof reads the invoice, packing list and bill of lading together, validates every HTS number and container, builds the MIDs and flags what does not match — in about two minutes.
Data: Harmonized Tariff Schedule of the United States, US International Trade Commission. Rates are for information only.