HTS 9114: Other clock or watch parts
Heading 9114 of the Harmonized Tariff Schedule of the United States has 13 ten-digit statistical numbers. A US entry line in ACE needs the full ten digits, with the quantity in No. or kg.
Check additional duties before you file
- If the goods are made in China, check Section 301 duties under HTSUS heading 9903.88, on top of the general rate, and any exclusions.
| HTSUS number | Description | Unit | General rate |
|---|---|---|---|
| 9114.30 | Dials: | ||
| 9114.30.40.00 | Not exceeding 50 mm in width | No. | 0.4¢ each + 7.2% |
| 9114.30.80.00 | Exceeding 50 mm in width | No. | 4.4% |
| 9114.40 | Plates and bridges: | ||
| 9114.40.20.00 | Watch movement bottom or pillar plates or their equivalent | No. | 12¢ each |
| 9114.40.40.00 | Any plate, or set of plates, suitable for assembling thereon a clock movement | No. | 10¢ each |
| Other: | |||
| 9114.40.60.00 | For watches | No. | 7.3% |
| 9114.40.80.00 | Other | No. | 4.2% |
| 9114.90 | Other: | ||
| 9114.90.10.00 | Jewels | No. | Free |
| Assemblies and subassemblies for watch or clock movements consisting of two or more pieces or parts fastened or joined inseparably together: | |||
| 9114.90.15.00 | For watch movements | kg | 7.2% |
| 9114.90.30.00 | For clock movements | kg | 6% + 2.3¢/jewel + 0.2¢ for each other piece or part, but if consisting in part of a plate or a set of plates the total duty shall not exceed the duty for the complete movement |
| Springs, including hairsprings: | |||
| 9114.90.34.00 | For watches | No. | 7.3% |
| 9114.90.38.00 | Other | No. | 4.2% |
| Other: | |||
| 9114.90.40.00 | For watches | kg | 8.8% |
| 9114.90.50.00 | Other | kg | 4.2% |
Common paperwork mistakes with heading 9114
- The invoice shows the exporter's own code. Only the first six digits are shared worldwide; the US number has ten. Check every line against the list above.
- The quantity is in the wrong unit. These lines report quantity in No. or kg, which may not match the invoice's cartons, sets or pieces.
- The packing list and the bill of lading disagree on cartons or gross weight, which can lead to holds and exams.
- The manufacturer's name and address are missing, so the MID cannot be built from the documents.
Look up any ten-digit number, or read the guide to invoice and packing list mismatches.
Check the whole shipment, not one number
FreightProof reads the invoice, packing list and bill of lading together, validates every HTS number and container, builds the MIDs and flags what does not match — in about two minutes.
Data: Harmonized Tariff Schedule of the United States, US International Trade Commission. Rates are for information only.