HTS 8482: Ball or roller bearings, and parts thereof
Heading 8482 of the Harmonized Tariff Schedule of the United States has 56 ten-digit statistical numbers. A US entry line in ACE needs the full ten digits, with the quantity in No./kg or No. or kg.
Check additional duties before you file
- If the goods are made in China, check Section 301 duties under HTSUS heading 9903.88, on top of the general rate, and any exclusions.
| HTSUS number | Description | Unit | General rate |
|---|---|---|---|
| 8482.10 | Ball bearings: | ||
| 8482.10.10 | Ball bearings with integral shafts | 2.4% | |
| 8482.10.10.40 | Bearings having an outside diameter not over 30 mm | No./kg | |
| 8482.10.10.80 | Other | No./kg | |
| 8482.10.50 | Other | 9% | |
| 8482.10.50.04 | Unground bearings | No. | |
| Other: | |||
| 8482.10.50.08 | Thrust bearings | No./kg | |
| 8482.10.50.12 | Linear bearings | No./kg | |
| Angular contact bearings: | |||
| Wheel hub bearings units: | |||
| 8482.10.50.16 | Flanged | No./kg | |
| 8482.10.50.24 | Other | No./kg | |
| 8482.10.50.28 | Other | No./kg | |
| Radial bearings: | |||
| Single row bearings: | |||
| 8482.10.50.32 | Maximum or full capacity type | No./kg | |
| Other bearings, having an outside diameter of: | |||
| 8482.10.50.36 | Under 9 mm | No./kg | |
| 8482.10.50.44 | 9 mm and over but not over 30 mm | No./kg | |
| 8482.10.50.48 | Over 30 mm but not over 52 mm | No./kg | |
| 8482.10.50.52 | Over 52 mm but not over 100 mm. | No./kg | |
| 8482.10.50.56 | Over 100 mm | No./kg | |
| 8482.10.50.60 | Double row ball bearings | No./kg | |
| 8482.10.50.64 | Other | No./kg | |
| 8482.10.50.68 | Other | No./kg | |
| 8482.20.00 | Tapered roller bearings, including cone and tapered roller assemblies | 5.8% | |
| Cup and cone assemblies entered as a set: | |||
| Wheel hub units: | |||
| 8482.20.00.20 | Flanged | No./kg | |
| 8482.20.00.30 | Other | No./kg | |
| Other: | |||
| 8482.20.00.40 | With cups having an outside diameter not exceeding 102 mm | No./kg | |
| 8482.20.00.61 | With cups having an outside diameter exceeding 102 mm but not exceeding 203 mm | No./kg | |
| 8482.20.00.64 | With cups having an outside diameter exceeding 203 mm but not exceeding 305 mm | No./kg | |
| 8482.20.00.67 | Other | No./kg | |
| Cone assemblies entered separately: | |||
| 8482.20.00.70 | For cups having an outside diameter not exceeding 102 mm | No./kg | |
| 8482.20.00.81 | For cups having an outside diameter exceeding 102 mm but not exceeding 203 mm | No./kg | |
| 8482.20.00.90 | Other | No./kg | |
| 8482.30.00 | Spherical roller bearings | 5.8% | |
| 8482.30.00.40 | Single row | No./kg | |
| 8482.30.00.80 | Other | No./kg | |
| 8482.40.00.00 | Needle roller bearings, including cage and needle roller assemblies | No./kg | 5.8% |
| 8482.50.00.00 | Other cylindrical roller bearings, including cage and roller assemblies | No./kg | 5.8% |
| 8482.80.00 | Other, including combined ball/roller bearings | 5.8% | |
| 8482.80.00.20 | Combined ball and spherical roller bearings | No./kg | |
| 8482.80.00.40 | Combined ball and needle roller bearings | No./kg | |
| 8482.80.00.60 | Combined ball and other cylindrical roller bearings | No./kg | |
| 8482.80.00.80 | Other | No./kg | |
| Parts: | |||
| 8482.91.00 | Balls, needles and rollers | 4.4% | |
| Balls: | |||
| 8482.91.00.10 | Of alloy steel | kg | |
| 8482.91.00.15 | Of copper or copper alloys as described in statistical note 8 to this chapter | kg | |
| 8482.91.00.30 | Other | kg | |
| 8482.91.00.40 | Needles | kg | |
| 8482.91.00.50 | Tapered rollers | kg | |
| 8482.91.00.70 | Spherical rollers | kg | |
| 8482.91.00.80 | Other cylindrical rollers | kg | |
| 8482.91.00.90 | Other | kg | |
| 8482.99 | Other: | ||
| Inner or outer rings or races: | |||
| 8482.99.05.00 | For ball bearings | No./kg | 9.9% |
| 8482.99.15 | For tapered roller bearings | 5.8% | |
| Cups: | |||
| 8482.99.15.50 | Having an outside diameter not exceeding 203 mm | No./kg | |
| 8482.99.15.70 | Other | No./kg | |
| 8482.99.15.80 | Other | No./kg | |
| 8482.99.25 | Other | 5.8% | |
| 8482.99.25.20 | For spherical roller bearings | No./kg | |
| 8482.99.25.40 | For needle bearings | No./kg | |
| 8482.99.25.60 | For other cylindrical roller bearings | No./kg | |
| 8482.99.25.80 | Other | No./kg | |
| Other: | |||
| 8482.99.35.00 | Parts of ball bearings (including parts of ball bearings with integral shafts) | kg | 9.9% |
| 8482.99.45.00 | Parts of tapered roller bearings | kg | 5.8% |
| 8482.99.65 | Other | 5.8% | |
| 8482.99.65.10 | For spherical roller bearings | kg | |
| 8482.99.65.30 | For needle bearings | kg | |
| 8482.99.65.60 | For other cylindrical roller bearings | kg | |
| 8482.99.65.95 | Other | kg |
Common paperwork mistakes with heading 8482
- The invoice shows the exporter's own code. Only the first six digits are shared worldwide; the US number has ten. Check every line against the list above.
- The quantity is in the wrong unit. These lines report quantity in No./kg or No. or kg, which may not match the invoice's cartons, sets or pieces.
- The packing list and the bill of lading disagree on cartons or gross weight, which can lead to holds and exams.
- The manufacturer's name and address are missing, so the MID cannot be built from the documents.
Look up any ten-digit number, or read the guide to invoice and packing list mismatches.
Check the whole shipment, not one number
FreightProof reads the invoice, packing list and bill of lading together, validates every HTS number and container, builds the MIDs and flags what does not match — in about two minutes.
Data: Harmonized Tariff Schedule of the United States, US International Trade Commission. Rates are for information only.