HTS 8462: Machine tools (including presses) for working metal by forging, hammering or die forging (excluding rolling mills); machine tools (including presses, slitting lines and cut-to-length lines) for working metal by bending, folding, straightening, flattening, shearing, punching, notching or nibbling (excluding drawbenches); presses for working metal or metal carbides, not specified above
Heading 8462 of the Harmonized Tariff Schedule of the United States has 71 ten-digit statistical numbers. A US entry line in ACE needs the full ten digits, with the quantity in No..
Check additional duties before you file
- If the goods are made in China, check Section 301 duties under HTSUS heading 9903.88, on top of the general rate, and any exclusions.
| HTSUS number | Description | Unit | General rate |
|---|---|---|---|
| Hot forming machines for forging, die forging (including presses) and hot hammers: | |||
| 8462.11.00 | Closed die forging machines | 4.4% | |
| 8462.11.00.10 | Used or rebuilt | No. | |
| Other: | |||
| 8462.11.00.30 | Headers and upsetters | No. | |
| 8462.11.00.35 | Mechanical transfer presses | No. | |
| 8462.11.00.55 | Other | No. | |
| 8462.19.00 | Other | 4.4% | |
| 8462.19.00.10 | Used or rebuilt | No. | |
| Other: | |||
| 8462.19.00.30 | Headers and upsetters | No. | |
| 8462.19.00.35 | Mechanical transfer presses | No. | |
| 8462.19.00.55 | Other | No. | |
| Bending, folding, straightening or flattening machines (including press brakes) for flat products: | |||
| 8462.22.00 | Profile forming machines | 4.4% | |
| 8462.22.00.10 | Used or rebuilt | No. | |
| 8462.22.00.20 | Other, valued under $3,025 each | No. | |
| 8462.22.00.50 | Other | No. | |
| 8462.23.00 | Numerically controlled press brakes | 4.4% | |
| 8462.23.00.10 | Used or rebuilt | No. | |
| 8462.23.00.20 | Other, valued under $3,025 each | No. | |
| 8462.23.00.50 | Other | No. | |
| 8462.24.00 | Numerically controlled panel benders | 4.4% | |
| 8462.24.00.10 | Used or rebuilt | No. | |
| 8462.24.00.20 | Other, valued under $3,025 each | No. | |
| 8462.24.00.50 | Other | No. | |
| 8462.25.00 | Numerically controlled roll forming machines | 4.4% | |
| 8462.25.00.10 | Used or rebuilt | No. | |
| 8462.25.00.20 | Other, valued under $3,025 each | No. | |
| 8462.25.00.50 | Other | No. | |
| 8462.26.00 | Other numerically controlled bending, folding, straightening or flattening machines | 4.4% | |
| 8462.26.00.10 | Used or rebuilt | No. | |
| 8462.26.00.20 | Other, valued under $3,025 each | No. | |
| 8462.26.00.50 | Other | No. | |
| 8462.29.00 | Other | 4.4% | |
| 8462.29.00.10 | Used or rebuilt | No. | |
| 8462.29.00.20 | Other, valued under $3,025 each | No. | |
| Other: | |||
| 8462.29.00.30 | Press brakes | No. | |
| 8462.29.00.40 | Bending rolls | No. | |
| 8462.29.00.50 | Other | No. | |
| Slitting lines, cut-to-length lines and other shearing machines (excluding presses) for flat products, other than combined punching and shearing machines: | |||
| 8462.32 | Slitting lines and cut-to-length lines: | ||
| 8462.32.10 | Numerically controlled | 4.4% | |
| 8462.32.10.40 | Used or rebuilt | No. | |
| 8462.32.10.80 | Other | No. | |
| 8462.32.50 | Other | 4.4% | |
| 8462.32.50.10 | Used or rebuilt | No. | |
| 8462.32.50.20 | Other, valued under $3,025 each | No. | |
| 8462.32.50.50 | Other | No. | |
| 8462.33.00 | Numerically controlled shearing machines | 4.4% | |
| 8462.33.00.40 | Used or rebuilt | No. | |
| 8462.33.00.80 | Other | No. | |
| 8462.39.00 | Other | 4.4% | |
| 8462.39.00.10 | Used or rebuilt | No. | |
| 8462.39.00.20 | Other, valued under $3,025 each | No. | |
| 8462.39.00.50 | Other | No. | |
| Punching, notching or nibbling machines (excluding presses) for flat products including combined punching and shearing machines: | |||
| 8462.42.00 | Numerically controlled | 4.4% | |
| 8462.42.00.40 | Used or rebuilt | No. | |
| 8462.42.00.80 | Other | No. | |
| 8462.49.00 | Other | 4.4% | |
| 8462.49.00.10 | Used or rebuilt | No. | |
| 8462.49.00.20 | Other, valued under $3,025 each | No. | |
| 8462.49.00.50 | Other | No. | |
| Machines for working tube, pipe, hollow section and bar (excluding presses): | |||
| 8462.51.00 | Numerically controlled | 4.4% | |
| 8462.51.00.40 | Used or rebuilt | No. | |
| 8462.51.00.80 | Other | No. | |
| 8462.59.00 | Other | 4.4% | |
| 8462.59.00.10 | Used or rebuilt | No. | |
| 8462.59.00.20 | Other, valued under $3,025 each | No. | |
| 8462.59.00.50 | Other | No. | |
| Cold metal working presses: | |||
| 8462.61 | Hydraulic presses: | ||
| 8462.61.40 | Numerically controlled | 4.4% | |
| 8462.61.40.30 | Used or rebuilt | No. | |
| 8462.61.40.60 | Other | No. | |
| 8462.61.80 | Other | 4.4% | |
| 8462.61.80.30 | Used or rebuilt | No. | |
| 8462.61.80.90 | Other | No. | |
| 8462.62 | Mechanical presses: | ||
| 8462.62.40 | Numerically controlled | 4.4% | |
| 8462.62.40.10 | Used or rebuilt | No. | |
| 8462.62.40.30 | Other | No. | |
| 8462.62.50 | Other | 4.4% | |
| 8462.62.50.30 | Used or rebuilt | No. | |
| 8462.62.50.90 | Other | No. | |
| 8462.63 | Servo-presses: | ||
| 8462.63.40 | Numerically controlled | 4.4% | |
| 8462.63.40.10 | Used or rebuilt | No. | |
| 8462.63.40.30 | Other | No. | |
| 8462.63.80 | Other | 4.4% | |
| 8462.63.80.10 | Used or rebuilt | No. | |
| 8462.63.80.20 | Other, valued under $3,025 each | No. | |
| 8462.63.80.60 | Other | No. | |
| 8462.69 | Other: | ||
| 8462.69.40 | Numerically controlled | 4.4% | |
| 8462.69.40.10 | Used or rebuilt | No. | |
| 8462.69.40.30 | Other | No. | |
| 8462.69.80 | Other | 4.4% | |
| 8462.69.80.10 | Used or rebuilt | No. | |
| 8462.69.80.20 | Other, valued under $3,025 each | No. | |
| 8462.69.80.60 | Other | No. | |
| 8462.90 | Other: | ||
| 8462.90.40 | Numerically controlled | 4.4% | |
| 8462.90.40.10 | Used or rebuilt | No. | |
| 8462.90.40.30 | Other | No. | |
| 8462.90.80 | Other | 4.4% | |
| 8462.90.80.10 | Used or rebuilt | No. | |
| 8462.90.80.20 | Other, valued under $3,025 each | No. | |
| 8462.90.80.60 | Other | No. |
Common paperwork mistakes with heading 8462
- The invoice shows the exporter's own code. Only the first six digits are shared worldwide; the US number has ten. Check every line against the list above.
- The quantity is in the wrong unit. These lines report quantity in No., which may not match the invoice's cartons, sets or pieces.
- The packing list and the bill of lading disagree on cartons or gross weight, which can lead to holds and exams.
- The manufacturer's name and address are missing, so the MID cannot be built from the documents.
Look up any ten-digit number, or read the guide to invoice and packing list mismatches.
Check the whole shipment, not one number
FreightProof reads the invoice, packing list and bill of lading together, validates every HTS number and container, builds the MIDs and flags what does not match — in about two minutes.
Data: Harmonized Tariff Schedule of the United States, US International Trade Commission. Rates are for information only.