HTS 8458: Lathes (including turning centers) for removing metal
Heading 8458 of the Harmonized Tariff Schedule of the United States has 22 ten-digit statistical numbers. A US entry line in ACE needs the full ten digits, with the quantity in No..
Check additional duties before you file
- If the goods are made in China, check Section 301 duties under HTSUS heading 9903.88, on top of the general rate, and any exclusions.
| HTSUS number | Description | Unit | General rate |
|---|---|---|---|
| Horizontal lathes: | |||
| 8458.11.00 | Numerically controlled | 4.4% | |
| 8458.11.00.05 | Used or rebuilt | No. | |
| Other: | |||
| 8458.11.00.10 | Multiple spindle | No. | |
| Other: | |||
| 8458.11.00.30 | With a power rating of less than 18.65 kW | No. | |
| 8458.11.00.50 | With a power rating of 18.65 kW or greater but not exceeding 37.3 kW | No. | |
| 8458.11.00.90 | With a power rating exceeding 37.3 kW | No. | |
| 8458.19.00 | Other | 4.4% | |
| 8458.19.00.10 | Used or rebuilt | No. | |
| 8458.19.00.20 | Other, valued under $3,025 each | No. | |
| Other: | |||
| 8458.19.00.30 | Engine or toolroom lathes | No. | |
| Automatic bar and/or chucking machines: | |||
| 8458.19.00.50 | Single spindle | No. | |
| 8458.19.00.70 | Multiple spindle | No. | |
| 8458.19.00.90 | Other | No. | |
| Other lathes: | |||
| 8458.91 | Numerically controlled: | ||
| 8458.91.10 | Vertical turret lathes | 4.2% | |
| 8458.91.10.40 | Used or rebuilt | No. | |
| Other: | |||
| 8458.91.10.60 | Multiple spindle | No. | |
| 8458.91.10.80 | Other | No. | |
| 8458.91.50 | Other | 4.4% | |
| 8458.91.50.40 | Used or rebuilt | No. | |
| Other: | |||
| 8458.91.50.50 | Multiple spindle | No. | |
| 8458.91.50.70 | Other | No. | |
| 8458.99 | Other: | ||
| 8458.99.10 | Vertical turret lathes | 4.2% | |
| 8458.99.10.10 | Used or rebuilt | No. | |
| 8458.99.10.50 | Other | No. | |
| 8458.99.50 | Other | 4.4% | |
| 8458.99.50.30 | Used or rebuilt | No. | |
| 8458.99.50.60 | Other, valued under $3,025 each | No. | |
| 8458.99.50.90 | Other | No. |
Common paperwork mistakes with heading 8458
- The invoice shows the exporter's own code. Only the first six digits are shared worldwide; the US number has ten. Check every line against the list above.
- The quantity is in the wrong unit. These lines report quantity in No., which may not match the invoice's cartons, sets or pieces.
- The packing list and the bill of lading disagree on cartons or gross weight, which can lead to holds and exams.
- The manufacturer's name and address are missing, so the MID cannot be built from the documents.
Look up any ten-digit number, or read the guide to invoice and packing list mismatches.
Check the whole shipment, not one number
FreightProof reads the invoice, packing list and bill of lading together, validates every HTS number and container, builds the MIDs and flags what does not match — in about two minutes.
Data: Harmonized Tariff Schedule of the United States, US International Trade Commission. Rates are for information only.