HTS 8406: Steam turbines and other vapor turbines, and parts thereof
Heading 8406 of the Harmonized Tariff Schedule of the United States has 19 ten-digit statistical numbers. A US entry line in ACE needs the full ten digits, with the quantity in No. or kg.
Check additional duties before you file
- If the goods are made in China, check Section 301 duties under HTSUS heading 9903.88, on top of the general rate, and any exclusions.
| HTSUS number | Description | Unit | General rate |
|---|---|---|---|
| 8406.10 | Turbines for marine propulsion: | ||
| 8406.10.10.00 | Steam turbines | No. | 6.7% |
| 8406.10.90.00 | Other | No. | Free |
| Other turbines: | |||
| 8406.81 | Of an output exceeding 40 MW: | ||
| 8406.81.10 | Steam turbines | 6.7% | |
| 8406.81.10.20 | Stationary steam turbines, condensing type | No. | |
| 8406.81.10.70 | Other | No. | |
| 8406.81.90.00 | Other | No. | Free |
| 8406.82 | Of an output not exceeding 40 MW: | ||
| 8406.82.10 | Steam turbines | 6.7% | |
| Stationary steam turbines, condensing type: | |||
| 8406.82.10.10 | Not exceeding 7,460 kW | No. | |
| 8406.82.10.20 | Exceeding 7,460 kW | No. | |
| Other: | |||
| 8406.82.10.50 | Not exceeding 7,460 kW | No. | |
| 8406.82.10.70 | Exceeding 7,460 kW | No. | |
| 8406.82.90.00 | Other | No. | Free |
| 8406.90 | Parts: | ||
| Of steam turbines: | |||
| 8406.90.20.00 | Rotors, finished for final assembly | No. | 5% |
| 8406.90.30.00 | Rotors, not further advanced than cleaned or machined for removal of fins, gates, sprues, and risers, or to permit location in finishing machinery | No. | 5% |
| 8406.90.40.00 | Blades, rotating or stationary | No. | 5% |
| 8406.90.45 | Other | 5% | |
| 8406.90.45.40 | Rotors or spindles and rotor or spindle assemblies | No. | |
| 8406.90.45.80 | Other | kg | |
| Other: | |||
| 8406.90.50.00 | Rotors, finished for final assembly | No. | Free |
| 8406.90.60.00 | Rotors, not further advanced than cleaned or machined for removal of fins, gates, sprues, and risers, or to permit location in finishing machinery | No. | Free |
| 8406.90.70.00 | Blades, rotating or stationary | No. | Free |
| 8406.90.75.00 | Other | kg | Free |
Common paperwork mistakes with heading 8406
- The invoice shows the exporter's own code. Only the first six digits are shared worldwide; the US number has ten. Check every line against the list above.
- The quantity is in the wrong unit. These lines report quantity in No. or kg, which may not match the invoice's cartons, sets or pieces.
- The packing list and the bill of lading disagree on cartons or gross weight, which can lead to holds and exams.
- The manufacturer's name and address are missing, so the MID cannot be built from the documents.
Look up any ten-digit number, or read the guide to invoice and packing list mismatches.
Check the whole shipment, not one number
FreightProof reads the invoice, packing list and bill of lading together, validates every HTS number and container, builds the MIDs and flags what does not match — in about two minutes.
Data: Harmonized Tariff Schedule of the United States, US International Trade Commission. Rates are for information only.