HTS 7601: Unwrought aluminum
Heading 7601 of the Harmonized Tariff Schedule of the United States has 13 ten-digit statistical numbers. A US entry line in ACE needs the full ten digits, with the quantity in kg.
Check additional duties before you file
- Steel and aluminum articles here may carry Section 232 duties. The entry can need the Chapter 99 number, the metal value and the country where the metal was melted and poured, or smelted and cast.
- If the goods are made in China, check Section 301 duties under HTSUS heading 9903.88, on top of the general rate, and any exclusions.
| HTSUS number | Description | Unit | General rate |
|---|---|---|---|
| 7601.10 | Aluminum, not alloyed: | ||
| 7601.10.30.00 | Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils | kg | 2.6% |
| 7601.10.60 | Other | Free | |
| 7601.10.60.40 | Of 99.9 percent aluminum or greater | kg | |
| 7601.10.60.45 | Of greater than 99.8 percent but less than 99.9 percent | kg | |
| 7601.10.60.90 | Other | kg | |
| 7601.20 | Aluminum alloys: | ||
| 7601.20.30.00 | Of uniform cross section throughout its length, the least cross-sectional dimension of which is not greater than 9.5 mm, in coils | kg | 2.6% |
| Other: | |||
| 7601.20.60.00 | Containing 25 percent or more by weight of silicon | kg | 2.1% |
| 7601.20.90 | Other | Free | |
| 7601.20.90.30 | Aluminum vanadium master alloy | kg | |
| Other: | |||
| 7601.20.90.45 | Of uniform circular cross section throughout its length, the foregoing comprised of billets, not in coils | kg | |
| 7601.20.90.60 | Other, containing 0.03 percent or more by weight of lead (secondary aluminum) | kg | |
| Other: | |||
| 7601.20.90.75 | Remelt scrap ingot | kg | |
| 7601.20.90.80 | Sheet ingot (slab) of a kind described in statistical note 3 to this chapter | kg | |
| 7601.20.90.85 | Foundry ingot of a kind described in statistical note 4 to this chapter | kg | |
| 7601.20.90.95 | Other | kg |
Common paperwork mistakes with heading 7601
- The invoice shows the exporter's own code. Only the first six digits are shared worldwide; the US number has ten. Check every line against the list above.
- The quantity is in the wrong unit. These lines report quantity in kg, which may not match the invoice's cartons, sets or pieces.
- The packing list and the bill of lading disagree on cartons or gross weight, which can lead to holds and exams.
- The manufacturer's name and address are missing, so the MID cannot be built from the documents.
Look up any ten-digit number, or read the guide to invoice and packing list mismatches.
Check the whole shipment, not one number
FreightProof reads the invoice, packing list and bill of lading together, validates every HTS number and container, builds the MIDs and flags what does not match — in about two minutes.
Data: Harmonized Tariff Schedule of the United States, US International Trade Commission. Rates are for information only.