HTS 7326: Other articles of iron or steel
Heading 7326 of the Harmonized Tariff Schedule of the United States has 24 ten-digit statistical numbers. A US entry line in ACE needs the full ten digits, with the quantity in kg or No. or No./kg or doz..
Check additional duties before you file
- Steel and aluminum articles here may carry Section 232 duties. The entry can need the Chapter 99 number, the metal value and the country where the metal was melted and poured, or smelted and cast.
- If the goods are made in China, check Section 301 duties under HTSUS heading 9903.88, on top of the general rate, and any exclusions.
| HTSUS number | Description | Unit | General rate |
|---|---|---|---|
| Forged or stamped, but not further worked: | |||
| 7326.11.00.00 | Grinding balls and similar articles for mills | kg | Free |
| 7326.19.00 | Other | 2.9% | |
| 7326.19.00.10 | Forged | kg | |
| 7326.19.00.80 | Other | kg | |
| 7326.20.00 | Articles of iron or steel wire | 3.9% | |
| 7326.20.00.10 | Belts and belting | kg | |
| 7326.20.00.20 | Garment hangers | No. | |
| 7326.20.00.30 | Sod staples, U staples, irrigation staples, ground staples, and ground pins | No. | |
| 7326.20.00.40 | Double loop bar ties and double loop wire ties | No. | |
| 7326.20.00.55 | Paint roller frames | No. | |
| 7326.20.00.90 | Other | No. | |
| 7326.90 | Other: | ||
| 7326.90.10.00 | Of tinplate | No./kg | Free |
| Other: | |||
| 7326.90.25.00 | Cable or inner wire for caliper and cantilever brakes and casing therefor, whether or not cut to length | kg | Free |
| 7326.90.35.00 | Containers of a kind normally carried on the person, in the pocket or in the handbag | doz. | 7.8% |
| 7326.90.45.00 | Horse and mule shoes | kg | Free |
| Other: | |||
| 7326.90.60.00 | Coated or plated with precious metal | No./kg | 8.6% |
| 7326.90.86 | Other | 2.9% | |
| 7326.90.86.05 | Rods for electrical grounding | kg | |
| 7326.90.86.10 | Laminated goods consisting of two or more flat-rolled sheets of iron or steel held together with an adhesive or having a core of non-metallic material | kg | |
| 7326.90.86.30 | Hangers and similar supports for tubes and pipes | kg | |
| 7326.90.86.35 | Fence posts, studded with corrugations, knobs, studs, notches or similar protrusions, with or without anchor plates | kg | |
| 7326.90.86.45 | Barbed tape | kg | |
| 7326.90.86.60 | Ladders | No. | |
| 7326.90.86.75 | Paint roller frames (other than of iron or steel wire) | No. | |
| 7326.90.86.76 | Metal handles for brooms, mops, paint applicators and similar products | No. | |
| 7326.90.86.77 | Burial caskets | No. | |
| 7326.90.86.88 | Other | kg |
Common paperwork mistakes with heading 7326
- The invoice shows the exporter's own code. Only the first six digits are shared worldwide; the US number has ten. Check every line against the list above.
- The quantity is in the wrong unit. These lines report quantity in kg or No. or No./kg or doz., which may not match the invoice's cartons, sets or pieces.
- The packing list and the bill of lading disagree on cartons or gross weight, which can lead to holds and exams.
- The manufacturer's name and address are missing, so the MID cannot be built from the documents.
Look up any ten-digit number, or read the guide to invoice and packing list mismatches.
Check the whole shipment, not one number
FreightProof reads the invoice, packing list and bill of lading together, validates every HTS number and container, builds the MIDs and flags what does not match — in about two minutes.
Data: Harmonized Tariff Schedule of the United States, US International Trade Commission. Rates are for information only.