HTS 7315: Chain and parts thereof, of iron or steel
Heading 7315 of the Harmonized Tariff Schedule of the United States has 20 ten-digit statistical numbers. A US entry line in ACE needs the full ten digits, with the quantity in kg.
Check additional duties before you file
- Steel and aluminum articles here may carry Section 232 duties. The entry can need the Chapter 99 number, the metal value and the country where the metal was melted and poured, or smelted and cast.
- If the goods are made in China, check Section 301 duties under HTSUS heading 9903.88, on top of the general rate, and any exclusions.
| HTSUS number | Description | Unit | General rate |
|---|---|---|---|
| Articulated link chain and parts thereof: | |||
| 7315.11.00 | Roller chain | Free | |
| 7315.11.00.05 | For motor vehicles | kg | |
| Other: | |||
| Of not over 50 mm pitch and containing more than 3 parts per pitch: | |||
| 7315.11.00.10 | Bicycle chains | kg | |
| 7315.11.00.45 | Other | kg | |
| 7315.11.00.60 | Other | kg | |
| 7315.12.00 | Other chain | Free | |
| 7315.12.00.20 | Of not over 50 mm pitch and containing more than 3 parts per pitch | kg | |
| Other: | |||
| 7315.12.00.40 | Welded steel chain | kg | |
| 7315.12.00.60 | Cast and combination chain | kg | |
| 7315.12.00.80 | Other | kg | |
| 7315.19.00.00 | Parts | kg | Free |
| 7315.20 | Skid chain: | ||
| 7315.20.10.00 | Not over 8 mm in diameter | kg | Free |
| 7315.20.50.00 | Over 8 mm in diameter | kg | Free |
| Other chain: | |||
| 7315.81.00.00 | Stud link | kg | Free |
| 7315.82 | Other, welded link: | ||
| Of alloy steel: | |||
| 7315.82.10.00 | Not over 10 mm in diameter | kg | Free |
| 7315.82.30.00 | Over 10 mm in diameter | kg | Free |
| Of iron or nonalloy steel: | |||
| 7315.82.50.00 | Not over 10 mm in diameter | kg | Free |
| 7315.82.70.00 | Over 10 mm in diameter | kg | Free |
| 7315.89 | Other: | ||
| With links of essentially round cross sections: | |||
| 7315.89.10.00 | Not over 8 mm in diameter | kg | 1.5% |
| 7315.89.30.00 | Over 8 mm in diameter | kg | Free |
| 7315.89.50.00 | Other | kg | 3.9% |
| 7315.90.00.00 | Other parts | kg | 2.9% |
Common paperwork mistakes with heading 7315
- The invoice shows the exporter's own code. Only the first six digits are shared worldwide; the US number has ten. Check every line against the list above.
- The quantity is in the wrong unit. These lines report quantity in kg, which may not match the invoice's cartons, sets or pieces.
- The packing list and the bill of lading disagree on cartons or gross weight, which can lead to holds and exams.
- The manufacturer's name and address are missing, so the MID cannot be built from the documents.
Look up any ten-digit number, or read the guide to invoice and packing list mismatches.
Check the whole shipment, not one number
FreightProof reads the invoice, packing list and bill of lading together, validates every HTS number and container, builds the MIDs and flags what does not match — in about two minutes.
Data: Harmonized Tariff Schedule of the United States, US International Trade Commission. Rates are for information only.