HTS 7305: Other tubes and pipes (for example, welded, riveted or similarly closed), having circular cross sections, the external diameter of which exceeds 406.4 mm, of iron or steel
Heading 7305 of the Harmonized Tariff Schedule of the United States has 21 ten-digit statistical numbers. A US entry line in ACE needs the full ten digits, with the quantity in kg.
Check additional duties before you file
- Steel and aluminum articles here may carry Section 232 duties. The entry can need the Chapter 99 number, the metal value and the country where the metal was melted and poured, or smelted and cast.
- If the goods are made in China, check Section 301 duties under HTSUS heading 9903.88, on top of the general rate, and any exclusions.
| HTSUS number | Description | Unit | General rate |
|---|---|---|---|
| Line pipe of a kind used for oil or gas pipelines: | |||
| 7305.11 | Longitudinally submerged arc welded: | ||
| 7305.11.10 | Of iron or nonalloy steel | Free | |
| 7305.11.10.30 | With an external diameter exceeding 406.4 mm but not exceeding 609.6 mm | kg | |
| 7305.11.10.60 | With an external diameter exceeding 609.6 mm | kg | |
| 7305.11.50.00 | Of alloy steel | kg | Free |
| 7305.12 | Other, longitudinally welded: | ||
| 7305.12.10 | Of iron or nonalloy steel | Free | |
| 7305.12.10.30 | With an external diameter exceeding 406.4 mm but not exceeding 609.6 mm | kg | |
| 7305.12.10.60 | With an external diameter exceeding 609.6 mm | kg | |
| 7305.12.50.00 | Of alloy steel | kg | Free |
| 7305.19 | Other: | ||
| 7305.19.10 | Of iron or nonalloy steel | Free | |
| 7305.19.10.30 | With an external diameter exceeding 406.4 mm but not exceeding 609.6 mm | kg | |
| 7305.19.10.60 | With an external diameter exceeding 609.6 mm | kg | |
| 7305.19.50.00 | Of alloy steel | kg | Free |
| 7305.20 | Casing of a kind used in drilling for oil or gas: | ||
| Of iron or nonalloy steel: | |||
| 7305.20.20.00 | Threaded or coupled | kg | Free |
| 7305.20.40.00 | Other | kg | Free |
| Of alloy steel: | |||
| 7305.20.60.00 | Threaded or coupled | kg | Free |
| 7305.20.80.00 | Other | kg | Free |
| Other, welded: | |||
| 7305.31 | Longitudinally welded: | ||
| 7305.31.20.00 | Tapered pipes and tubes of steel principally used as parts of illuminating articles | kg | Free |
| Other: | |||
| 7305.31.40.00 | Of iron or nonalloy steel | kg | Free |
| 7305.31.60 | Of alloy steel | Free | |
| 7305.31.60.10 | Of stainless steel | kg | |
| 7305.31.60.90 | Other | kg | |
| 7305.39 | Other: | ||
| 7305.39.10.00 | Of iron or nonalloy steel | kg | Free |
| 7305.39.50.00 | Of alloy steel | kg | Free |
| 7305.90 | Other: | ||
| 7305.90.10.00 | Of iron or nonalloy steel | kg | Free |
| 7305.90.50.00 | Of alloy steel | kg | Free |
Common paperwork mistakes with heading 7305
- The invoice shows the exporter's own code. Only the first six digits are shared worldwide; the US number has ten. Check every line against the list above.
- The quantity is in the wrong unit. These lines report quantity in kg, which may not match the invoice's cartons, sets or pieces.
- The packing list and the bill of lading disagree on cartons or gross weight, which can lead to holds and exams.
- The manufacturer's name and address are missing, so the MID cannot be built from the documents.
Look up any ten-digit number, or read the guide to invoice and packing list mismatches.
Check the whole shipment, not one number
FreightProof reads the invoice, packing list and bill of lading together, validates every HTS number and container, builds the MIDs and flags what does not match — in about two minutes.
Data: Harmonized Tariff Schedule of the United States, US International Trade Commission. Rates are for information only.