HTS 7208: Flat-rolled products of iron or nonalloy steel, of a width of 600 mm or more, hot-rolled, not clad, plated or coated
Heading 7208 of the Harmonized Tariff Schedule of the United States has 32 ten-digit statistical numbers. A US entry line in ACE needs the full ten digits, with the quantity in kg.
Check additional duties before you file
- Goods under this heading are often covered by antidumping or countervailing duty orders (hot-rolled steel flat products). Confirm scope, country and manufacturer in CBP's AD/CVD case search. A missing case number is a common reason for penalties.
- Steel and aluminum articles here may carry Section 232 duties. The entry can need the Chapter 99 number, the metal value and the country where the metal was melted and poured, or smelted and cast.
- If the goods are made in China, check Section 301 duties under HTSUS heading 9903.88, on top of the general rate, and any exclusions.
| HTSUS number | Description | Unit | General rate |
|---|---|---|---|
| 7208.10 | In coils, not further worked than hot-rolled, with patterns in relief: | ||
| 7208.10.15.00 | Pickled | kg | Free |
| Other: | |||
| 7208.10.30.00 | Of a thickness of 4.75 mm or more | kg | Free |
| 7208.10.60.00 | Of a thickness of less than 4.75 mm | kg | Free |
| Other, in coils, not further worked than hot-rolled, pickled: | |||
| 7208.25 | Of a thickness of 4.75 mm or more: | ||
| 7208.25.30.00 | Of high-strength steel | kg | Free |
| 7208.25.60.00 | Other | kg | Free |
| 7208.26.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | |
| 7208.26.00.30 | High-strength steel | kg | |
| 7208.26.00.60 | Other | kg | |
| 7208.27.00 | Of a thickness of less than 3 mm | Free | |
| High-strength steel: | |||
| 7208.27.00.40 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | kg | |
| 7208.27.00.45 | Other | kg | |
| 7208.27.00.60 | Other | kg | |
| Other, in coils, not further worked than hot-rolled: | |||
| 7208.36.00 | Of a thickness exceeding 10 mm | Free | |
| 7208.36.00.30 | High-strength steel | kg | |
| 7208.36.00.60 | Other | kg | |
| 7208.37.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | Free | |
| 7208.37.00.30 | High-strength steel | kg | |
| 7208.37.00.60 | Other | kg | |
| 7208.38.00 | Of a thickness of 3 mm or more but less than 4.75 mm | Free | |
| 7208.38.00.15 | High-strength steel | kg | |
| Other: | |||
| 7208.38.00.30 | With untrimmed edges | kg | |
| 7208.38.00.90 | Other | kg | |
| 7208.39.00 | Of a thickness of less than 3 mm | Free | |
| High-strength steel: | |||
| 7208.39.00.20 | “Advanced” or “ultra” of a kind described in statistical note 4 to this chapter | kg | |
| 7208.39.00.25 | Other | kg | |
| Other: | |||
| 7208.39.00.30 | With untrimmed edges | kg | |
| 7208.39.00.90 | Other | kg | |
| 7208.40 | Not in coils, not further worked than hot-rolled, with patterns in relief: | ||
| 7208.40.30 | Of a thickness of 4.75 mm or more | Free | |
| 7208.40.30.30 | Of a thickness exceeding 10 mm | kg | |
| 7208.40.30.60 | Other | kg | |
| 7208.40.60 | Of a thickness of less than 4.75 mm | Free | |
| 7208.40.60.30 | Of a thickness less than 3 mm | kg | |
| 7208.40.60.60 | Other | kg | |
| Other, not in coils, not further worked than hot-rolled: | |||
| 7208.51.00 | Of a thickness exceeding 10 mm | Free | |
| 7208.51.00.30 | Universal mill plate | kg | |
| Other: | |||
| 7208.51.00.45 | Of high-strength steel | kg | |
| 7208.51.00.60 | Other | kg | |
| 7208.52.00.00 | Of a thickness of 4.75 mm or more but not exceeding 10 mm | kg | Free |
| 7208.53.00.00 | Of a thickness of 3 mm or more but less than 4.75 mm | kg | Free |
| 7208.54.00.00 | Of a thickness of less than 3 mm | kg | Free |
| 7208.90.00.00 | Other | kg | Free |
Common paperwork mistakes with heading 7208
- The invoice shows the exporter's own code. Only the first six digits are shared worldwide; the US number has ten. Check every line against the list above.
- The quantity is in the wrong unit. These lines report quantity in kg, which may not match the invoice's cartons, sets or pieces.
- The packing list and the bill of lading disagree on cartons or gross weight, which can lead to holds and exams.
- The manufacturer's name and address are missing, so the MID cannot be built from the documents.
Look up any ten-digit number, or read the guide to invoice and packing list mismatches.
Check the whole shipment, not one number
FreightProof reads the invoice, packing list and bill of lading together, validates every HTS number and container, builds the MIDs and flags what does not match — in about two minutes.
Data: Harmonized Tariff Schedule of the United States, US International Trade Commission. Rates are for information only.