HTS 4412: Plywood, veneered panels and similar laminated wood
Heading 4412 of the Harmonized Tariff Schedule of the United States has 123 ten-digit statistical numbers. A US entry line in ACE needs the full ten digits, with the quantity in m3 or m2/m3.
Check additional duties before you file
- Goods under this heading are often covered by antidumping or countervailing duty orders (hardwood plywood). Confirm scope, country and manufacturer in CBP's AD/CVD case search. A missing case number is a common reason for penalties.
- If the goods are made in China, check Section 301 duties under HTSUS heading 9903.88, on top of the general rate, and any exclusions.
| HTSUS number | Description | Unit | General rate |
|---|---|---|---|
| 4412.10 | Of bamboo: | ||
| 4412.10.05.00 | Plywood | m3 | 8% |
| 4412.10.90.00 | Other | m3 | Free |
| Other plywood consisting solely of sheets of wood (other than bamboo), each ply not exceeding 6 mm in thickness: | |||
| 4412.31 | With at least one outer ply of tropical wood: | ||
| Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply: | |||
| 4412.31.06 | With a face ply of birch (Betula spp.) | Free | |
| 4412.31.06.20 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length | m3 | |
| Other: | |||
| 4412.31.06.40 | Not surface covered | m3 | |
| 4412.31.06.60 | Other | m3 | |
| 4412.31.26 | With a face ply of Spanish cedar (Cedrela spp.) or walnut (Juglans spp) | 8% | |
| 4412.31.26.10 | With a face ply of Spanish cedar (Cedrela spp.) | m3 | |
| 4412.31.26.20 | With a face ply of walnut (Juglans spp.) | m3 | |
| Other: | |||
| With at least one outer ply of the following tropical woods: Dark Red Meranti, Light Red Meranti, White Lauan, Sipo, Limba, Okoumé, Obeche, Acajou d'Afrique, Sapelli, Virola, Mahogany, Palissandre de Para, Palissandre de Rio or Palissandre de Rose: | |||
| 4412.31.42.00 | With a face ply of mahogany (Swietenia spp. or Khaya spp.) | m3 | 8% |
| 4412.31.45.00 | Panels not exceeding 3.6 mm in thickness and exceeding 1.2 m in width and 2.2 m in length | m3 | 8% |
| 4412.31.48 | Other | 8% | |
| 4412.31.48.50 | Panels not exceeding 3.6 mm in thickness and not exceeding 1.2 m in width and 2.2 m in length | m3 | |
| Other: | |||
| Not surface covered: | |||
| 4412.31.48.60 | Dark Red Meranti, Light Red Meranti or White Lauan (Luan) (Shorea spp.) | m3 | |
| 4412.31.48.63 | Limba (Terminalia spp.), also known as Terminalia and Nargusta | m3 | |
| 4412.31.48.66 | Virola (Virola spp.) | m3 | |
| 4412.31.48.69 | Other | m3 | |
| Other: | |||
| 4412.31.48.75 | Wood flooring | m3 | |
| 4412.31.48.80 | Other | m3 | |
| 4412.31.52 | Other | 8% | |
| 4412.31.52.25 | Wood flooring | m3 | |
| Other: | |||
| 4412.31.52.35 | With a face ply of sen (Kalopanax spp.) | m3 | |
| Other: | |||
| 4412.31.52.55 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length | m3 | |
| Other: | |||
| Not surface covered: | |||
| 4412.31.52.60 | Albizia (Albizia spp.), also known as Falcata, Batai and Suar wood | m3 | |
| 4412.31.52.62 | Bintangor (Calophyllum spp.) | m3 | |
| 4412.31.52.64 | Mersawa (Anisoptera spp.) | m3 | |
| 4412.31.52.66 | Parica (Schizolobium spp.), also known as Pinho Cuiabano, Firetree and Guapuruvu | m3 | |
| 4412.31.52.68 | Pencil cedar, Nyatoh (Palaquium spp.) | m3 | |
| 4412.31.52.70 | Other | m3 | |
| 4412.31.52.75 | Other | m3 | |
| Other: | |||
| 4412.31.61.00 | With at least one outer ply of the following tropical woods: Dark Red Meranti, Light Red Meranti, White Lauan, Sipo, Limba, Okoumé, Obeche, Acajou d'Afrique, Sapelli, Virola, Mahogany, Palissandre de Para, Palissandre de Rio or Palissandre de Rose | m3 | 8% |
| 4412.31.92.00 | Other | m3 | 8% |
| 4412.33 | Other, with at least one outer ply of nonconiferous wood of the species alder (Alnus spp.), ash (Fraxinus spp.), beech (Fagus spp.), birch (Betula spp.), cherry (Prunus spp.), chestnut (Castanea spp.), elm (Ulmus spp.), eucalyptus (Eucalyptus spp.), hickory (Carya spp.), horse chestnut (Aesculus spp.), lime (Tilia spp.), maple (Acer spp.), oak (Quercus spp.), plane tree (Platanus spp.), poplar and aspen (Populus spp.), robinia (Robinia spp.), tulipwood (Liriodendron spp.) or walnut (Juglans spp.): | ||
| Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply: | |||
| 4412.33.06 | With a face ply of birch (Betula spp.) | Free | |
| 4412.33.06.20 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length | m3 | |
| Other: | |||
| 4412.33.06.40 | Not surface covered | m3 | |
| Other: | |||
| 4412.33.06.65 | Wood flooring | m3 | |
| 4412.33.06.70 | Other | m3 | |
| 4412.33.26 | With a face ply of walnut (Juglans spp.) | 5.1% | |
| 4412.33.26.25 | Wood flooring | m3 | |
| 4412.33.26.30 | Other | m3 | |
| 4412.33.32 | Other | 8% | |
| 4412.33.32.25 | Wood flooring | m3 | |
| Other: | |||
| 4412.33.32.35 | With a face ply of sen (Kalopanax spp.) | m3 | |
| 4412.33.32.55 | With a face ply of mahogany (Swietenia spp. or Khaya spp.) | m3 | |
| Other: | |||
| 4412.33.32.65 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length | m3 | |
| Other: | |||
| 4412.33.32.75 | Not surface covered | m3 | |
| 4412.33.32.85 | Other | m3 | |
| 4412.33.57.00 | Other | m3 | 8% |
| 4412.34 | Other, with at least one outer ply of nonconiferous wood not specified under subheading 4412.33: | ||
| Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply: | |||
| 4412.34.26.00 | With a face ply of Spanish cedar (Cedrela spp.) | m3 | 5.1% |
| 4412.34.32 | Other | 8% | |
| 4412.34.32.25 | Wood flooring | m3 | |
| Other: | |||
| 4412.34.32.35 | With a face ply of sen (Kalopanax spp.) | m3 | |
| 4412.34.32.55 | With a face ply of mahogany (Swietenia spp. or Khaya spp.) | m3 | |
| Other: | |||
| 4412.34.32.65 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length | m3 | |
| Other: | |||
| 4412.34.32.75 | Not surface covered | m3 | |
| 4412.34.32.85 | Other | m3 | |
| 4412.34.57.00 | Other | m3 | 8% |
| 4412.39 | Other, with both outer plies of coniferous wood: | ||
| Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply: | |||
| 4412.39.10.00 | With a face ply of Parana pine (Araucaria angustifolia) | m3 | Free |
| 4412.39.30.00 | With a face ply of European red pine (Pinus silvestris) | m3 | 3.4% |
| 4412.39.40 | Other | 8% | |
| With at least one outer ply of Douglas fir (Pseudotsuga menziesii): | |||
| 4412.39.40.11 | Rough, or touch sanded for sizing purposes, but not further processed | m3 | |
| 4412.39.40.12 | Fully sanded on at least one face, but not further processed | m3 | |
| 4412.39.40.19 | Other | m3 | |
| With at least one outer ply of long leaf pine (Pinus palustris), short leaf pine (Pinus echinata), southern yellow pine (loblolly pine)(Pinus taeda), slash pine (Pinus elliotti), pitch pine (Pinus rigida) or Virginia pine (Pinus virginiana): | |||
| 4412.39.40.31 | Rough, or touch sanded for sizing purposes, but not further processed | m3 | |
| 4412.39.40.32 | Fully sanded on at least one face, but not further processed | m3 | |
| 4412.39.40.39 | Other | m3 | |
| With at least one outer ply of Agathis spp.: | |||
| 4412.39.40.51 | Rough, or touch sanded for sizing purposes, but not further processed | m3 | |
| 4412.39.40.52 | Fully sanded on at least one face, but not further processed | m3 | |
| 4412.39.40.59 | Other | m3 | |
| Other: | |||
| 4412.39.40.61 | Rough, or touch sanded for sizing purposes, but not further processed | m3 | |
| 4412.39.40.62 | Fully sanded on at least one face, but not further processed | m3 | |
| 4412.39.40.69 | Other | m3 | |
| 4412.39.50 | Other | 5.1% | |
| 4412.39.50.10 | With at least one outer ply of Douglas fir (Pseudotsuga menziesii) | m3 | |
| 4412.39.50.30 | With at least one outer ply of long leaf pine (Pinus palustris), short leaf pine (Pinus echinata), southern yellow pine (loblolly pine) (Pinus taeda), slash pine (Pinus elliotti), pitch pine (Pinus rigida) or Virginia pine (Pinus virginiana) | m3 | |
| 4412.39.50.50 | Other | m3 | |
| Laminated veneered lumber (LVL): | |||
| 4412.41.00.00 | With at least one outer ply of tropical wood | m3 | Free |
| 4412.42.00.00 | Other, with at least one outer ply of nonconiferous wood | m3 | Free |
| 4412.49.00.00 | Other, with both outer plies of coniferous wood | m3 | Free |
| Blockboard, laminboard and battenboard: | |||
| 4412.51 | With at least one outer ply of tropical wood: | ||
| Plywood: | |||
| Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply: | |||
| 4412.51.10 | With a face ply of birch (Betula spp.) | Free | |
| 4412.51.10.30 | Not surface covered | m3 | |
| 4412.51.10.50 | Other | m3 | |
| 4412.51.31 | Other | 8% | |
| 4412.51.31.05 | Wood flooring | m2/m3 | |
| Other: | |||
| 4412.51.31.11 | With a face ply of Spanish cedar (Cedrela spp.) | m2/m3 | |
| 4412.51.31.21 | With a face ply of walnut (Juglans spp.) | m2/m3 | |
| 4412.51.31.41 | With a face ply of mahogany (Swietenia spp. or Khaya spp.) | m2/m3 | |
| Other: | |||
| 4412.51.31.61 | Not surface covered | m2/m3 | |
| 4412.51.31.75 | Other | m2/m3 | |
| 4412.51.41.00 | Other | m3 | 8% |
| 4412.51.51.00 | Other | m3 | Free |
| 4412.52 | Other, with at least one outer ply of nonconiferous wood: | ||
| Plywood: | |||
| Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply: | |||
| 4412.52.10 | With a face ply of birch (Betula spp.) | Free | |
| 4412.52.10.30 | Not surface covered | m3 | |
| 4412.52.10.50 | Other | m3 | |
| 4412.52.31 | Other | 8% | |
| 4412.52.31.05 | Wood flooring | m2/m3 | |
| Other: | |||
| 4412.52.31.21 | With a face ply of walnut (Juglans spp.) | m2/m3 | |
| Other: | |||
| 4412.52.31.61 | Not surface covered | m2/m3 | |
| 4412.52.31.75 | Other | m2/m3 | |
| 4412.52.41.00 | Other | m3 | 8% |
| 4412.52.51.00 | Other | m3 | Free |
| 4412.59 | Other, with both outer plies of coniferous wood: | ||
| Plywood: | |||
| Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply: | |||
| 4412.59.60.00 | With a face ply of Parana pine (Araucaria angustifolia) | m3 | Free |
| 4412.59.70.00 | With a face ply of European red pine (Pinus silvestris) | m3 | 3.4% |
| 4412.59.80.00 | Other | m3 | 8% |
| 4412.59.90.00 | Other | m3 | 5.1% |
| 4412.59.95.00 | Other | m3 | Free |
| Other: | |||
| 4412.91 | With at least one outer ply of tropical wood: | ||
| 4412.91.06.00 | Containing at least one layer of particle board | m3 | Free |
| Other: | |||
| Plywood: | |||
| Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply: | |||
| 4412.91.10 | With a face ply of birch (Betula spp.) | Free | |
| 4412.91.10.20 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length | m3 | |
| Other: | |||
| 4412.91.10.30 | Not surface covered | m3 | |
| 4412.91.10.40 | Other | m3 | |
| 4412.91.31 | Other | 8% | |
| 4412.91.31.10 | With a face ply of Spanish cedar (Cedrela spp.) | m3 | |
| 4412.91.31.20 | With a face ply of walnut (Juglans spp.) | m3 | |
| 4412.91.31.30 | With a face ply of sen (Kalopanax spp.) | m3 | |
| 4412.91.31.40 | With a face ply of mahogany (Swietenia spp. or Khaya spp.) | m3 | |
| Other: | |||
| 4412.91.31.50 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width, and 2.2 m in length | m3 | |
| 4412.91.31.60 | Other, not surface covered | m3 | |
| 4412.91.31.70 | Other | m3 | |
| 4412.91.41.00 | Other | m3 | 8% |
| 4412.91.51 | Other | Free | |
| 4412.91.51.05 | Wood flooring | m3 | |
| 4412.91.51.15 | Other | m3 | |
| 4412.92 | Other, with at least one outer ply of nonconiferous wood: | ||
| 4412.92.07.00 | Containing at least one layer of particle board | m3 | Free |
| Other: | |||
| Plywood: | |||
| Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply: | |||
| 4412.92.11 | With a face ply of birch (Betula spp.) | Free | |
| 4412.92.11.20 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width and 2.2 m in length | m3 | |
| Other: | |||
| 4412.92.11.30 | Not surface covered | m3 | |
| 4412.92.11.40 | Other | m3 | |
| 4412.92.31 | Other | 8% | |
| 4412.92.31.20 | With a face ply of walnut (Juglans spp.) | m3 | |
| Other: | |||
| 4412.92.31.50 | Panels not exceeding in any dimension 3.6 mm in thickness, 1.2 m in width, and 2.2 m in length | m3 | |
| 4412.92.31.60 | Other, not surface covered | m3 | |
| 4412.92.31.70 | Other | m3 | |
| 4412.92.42.00 | Other | m3 | 8% |
| 4412.92.52 | Other | Free | |
| 4412.92.52.05 | Wood flooring | m3 | |
| 4412.92.52.15 | Other | m3 | |
| 4412.99 | Other, with both outer plies of coniferous wood: | ||
| 4412.99.58.00 | Containing at least one layer of particle board | m3 | Free |
| Other: | |||
| Plywood: | |||
| Not surface covered, or surface covered with a clear or transparent material which does not obscure the grain, texture or markings of the face ply: | |||
| 4412.99.61.00 | With a face ply of Parana pine (Araucaria angustifolia) | m3 | Free |
| 4412.99.71.00 | With a face ply of European red pine (Pinus silvestris) | m3 | 3.4% |
| 4412.99.81.00 | Other | m3 | 8% |
| 4412.99.91.00 | Other | m3 | 5.1% |
| 4412.99.97.00 | Other | m3 | Free |
Common paperwork mistakes with heading 4412
- The invoice shows the exporter's own code. Only the first six digits are shared worldwide; the US number has ten. Check every line against the list above.
- The quantity is in the wrong unit. These lines report quantity in m3 or m2/m3, which may not match the invoice's cartons, sets or pieces.
- The packing list and the bill of lading disagree on cartons or gross weight, which can lead to holds and exams.
- The manufacturer's name and address are missing, so the MID cannot be built from the documents.
Look up any ten-digit number, or read the guide to invoice and packing list mismatches.
Check the whole shipment, not one number
FreightProof reads the invoice, packing list and bill of lading together, validates every HTS number and container, builds the MIDs and flags what does not match — in about two minutes.
Data: Harmonized Tariff Schedule of the United States, US International Trade Commission. Rates are for information only.