HTS 3702: Photographic film in rolls, sensitized, unexposed, of any material other than paper, paperboard or textiles; instant print film in rolls, sensitized, unexposed
Heading 3702 of the Harmonized Tariff Schedule of the United States has 24 ten-digit statistical numbers. A US entry line in ACE needs the full ten digits, with the quantity in m2 or No. or m/m2.
Check additional duties before you file
- If the goods are made in China, check Section 301 duties under HTSUS heading 9903.88, on top of the general rate, and any exclusions.
| HTSUS number | Description | Unit | General rate |
|---|---|---|---|
| 3702.10.00 | For X-ray | 3.7% | |
| 3702.10.00.30 | Medical, other than dental | m2 | |
| 3702.10.00.60 | Other | m2 | |
| Other film, without perforations, of a width not exceeding 105 mm: | |||
| 3702.31.01.00 | For color photography (polychrome) | No. | 3.7% |
| 3702.32.01 | Other, with silver halide emulsion | 3.7% | |
| 3702.32.01.30 | Microfilm | m2 | |
| 3702.32.01.60 | Other | m2 | |
| 3702.39.01.00 | Other | m2 | 3.7% |
| Other film, without perforations, of a width exceeding 105 mm: | |||
| 3702.41.01.00 | Of a width exceeding 610 mm and of a length exceeding 200 m, for color photography (polychrome) | m2 | 3.7% |
| 3702.42.01.00 | Of a width exceeding 610 mm and of a length exceeding 200 m, other than for color photography | m2 | 3.7% |
| 3702.43.01.00 | Of a width exceeding 610 mm and of a length not exceeding 200 m | m2 | 3.7% |
| 3702.44.01 | Of a width exceeding 105 mm but not exceeding 610 mm | 3.7% | |
| 3702.44.01.30 | Graphic arts film | m2 | |
| 3702.44.01.60 | Other | m2 | |
| Other film, for color photography (polychrome): | |||
| 3702.52.01 | Of a width not exceeding 16 mm | 3.7% | |
| 3702.52.01.30 | Reversal color film | m2 | |
| 3702.52.01.60 | Other | m2 | |
| 3702.53.00 | Of a width exceeding 16 mm but not exceeding 35 mm and of a length not exceeding 30 m, for slides | 3.7% | |
| 3702.53.00.30 | 35 mm | No. | |
| 3702.53.00.60 | Other | No. | |
| 3702.54.00 | Of a width exceeding 16 mm but not exceeding 35 mm and of a length not exceeding 30 m, other than for slides | 3.7% | |
| 3702.54.00.30 | 35 mm | No. | |
| 3702.54.00.60 | Other | No. | |
| 3702.55.00 | Of a width exceeding 16 mm but not exceeding 35 mm and of a length exceeding 30 m | Free | |
| 3702.55.00.30 | Reversal color film | m2 | |
| 3702.55.00.60 | Other | m2 | |
| 3702.56.00 | Of a width exceeding 35 mm | Free | |
| 3702.56.00.30 | Motion-picture film | m/m2 | |
| 3702.56.00.60 | Other | m2 | |
| Other: | |||
| 3702.96.00.00 | Of a width not exceeding 35 mm and of a length not exceeding 30 m | m2 | 3.7% |
| 3702.97.00.00 | Of a width not exceeding 35 mm and of a length exceeding 30 m | m2 | Free |
| 3702.98.00.00 | Of a width exceeding 35 mm | m2 | 3.7% |
Common paperwork mistakes with heading 3702
- The invoice shows the exporter's own code. Only the first six digits are shared worldwide; the US number has ten. Check every line against the list above.
- The quantity is in the wrong unit. These lines report quantity in m2 or No. or m/m2, which may not match the invoice's cartons, sets or pieces.
- The packing list and the bill of lading disagree on cartons or gross weight, which can lead to holds and exams.
- The manufacturer's name and address are missing, so the MID cannot be built from the documents.
Look up any ten-digit number, or read the guide to invoice and packing list mismatches.
Check the whole shipment, not one number
FreightProof reads the invoice, packing list and bill of lading together, validates every HTS number and container, builds the MIDs and flags what does not match — in about two minutes.
Data: Harmonized Tariff Schedule of the United States, US International Trade Commission. Rates are for information only.