HTS 2710: Petroleum oils and oils obtained from bituminous minerals, other than crude; preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations; waste oils
Heading 2710 of the Harmonized Tariff Schedule of the United States has 76 ten-digit statistical numbers. A US entry line in ACE needs the full ten digits, with the quantity in bbl or kg/liters or kg.
Check additional duties before you file
- If the goods are made in China, check Section 301 duties under HTSUS heading 9903.88, on top of the general rate, and any exclusions.
| HTSUS number | Description | Unit | General rate |
|---|---|---|---|
| Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included, containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, other than those containing biodiesel and other than waste oils: | |||
| 2710.12 | Light oils and preparations: | ||
| 2710.12.15 | Motor fuel | 52.5¢/bbl | |
| Gasoline: | |||
| 2710.12.15.10 | Leaded | bbl | |
| Unleaded: | |||
| 2710.12.15.14 | Reformulated | bbl | |
| 2710.12.15.19 | Other | bbl | |
| 2710.12.15.20 | Jet fuel, naphtha-type | bbl | |
| 2710.12.15.50 | Other | bbl | |
| 2710.12.18 | Motor fuel blending stock | 52.5¢/bbl | |
| 2710.12.18.05 | Reformulated blendstock for oxygenate blending (RBOB) | bbl | |
| 2710.12.18.90 | Other | bbl | |
| 2710.12.25.00 | Naphthas (except motor fuel or motor fuel blending stock) | bbl | 10.5¢/bbl |
| Other: | |||
| 2710.12.45 | Mixtures of hydrocarbons not elsewhere specified or included, which contain by weight not over 50 percent of any single hydrocarbon compound | 10.5¢/bbl | |
| 2710.12.45.45 | Insulating or transformer oils | bbl | |
| 2710.12.45.60 | Renewable fuels blends containing not less than 51 percent by volume of biofuel, as described in statistical note 1 to this chapter | bbl | |
| 2710.12.45.95 | Other | bbl | |
| 2710.12.90.00 | Other | kg/liters | 7% |
| 2710.19 | Other: | ||
| Distillate and residual fuel oils (including blended fuel oils): | |||
| 2710.19.06 | Testing under 25 degrees A.P.I. | 5.25¢/bbl | |
| Having a Saybolt Universal viscosity at 37.8˚C of 45 seconds or more but not more than 125 seconds (No. 4-type fuel oils): | |||
| 2710.19.06.05 | Containing not more than 500 ppm of sulfur | bbl | |
| 2710.19.06.15 | Containing more than 500 ppm of sulfur | bbl | |
| Having a Saybolt Universal viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils): | |||
| 2710.19.06.25 | Fuel oil No. 5 | bbl | |
| 2710.19.06.30 | Fuel oil No. 6 | bbl | |
| 2710.19.06.35 | Other | bbl | |
| 2710.19.06.50 | Other | bbl | |
| 2710.19.11 | Testing 25 degrees A.P.I. or more | 10.5¢/bbl | |
| Having a Saybolt Universal viscosity at 37.8˚C of less than 45 seconds (light fuel oils): | |||
| Fuel oils Nos. 2 and 3: | |||
| Diesel oil: | |||
| 2710.19.11.02 | Containing not more than 15 ppm of sulfur | bbl | |
| 2710.19.11.03 | Containing more than 15 ppm but not more than 500 ppm of sulfur | bbl | |
| 2710.19.11.04 | Containing more than 500 ppm of sulfur | bbl | |
| Other: | |||
| 2710.19.11.05 | Containing not more than 15 ppm of sulfur | bbl | |
| 2710.19.11.07 | Containing more than 15 ppm but not more than 500 ppm of sulfur | bbl | |
| 2710.19.11.08 | Containing more than 500 ppm of sulfur | bbl | |
| Other: | |||
| 2710.19.11.11 | Containing not more than 15 ppm of sulfur | bbl | |
| 2710.19.11.13 | Containing more than 15 ppm but not more than 500 ppm of sulfur | bbl | |
| 2710.19.11.14 | Containing more than 500 ppm of sulfur | bbl | |
| Having a Saybolt Universal viscosity at 37.8˚C of 45 seconds or more but not more than 125 seconds (No. 4-type fuel oils): | |||
| 2710.19.11.15 | Containing not more than 500 ppm of sulfur | bbl | |
| 2710.19.11.25 | Containing more than 500 ppm of sulfur | bbl | |
| 2710.19.11.50 | Having a Saybolt Universal viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils) | bbl | |
| 2710.19.16.00 | Kerosene-type jet fuel | bbl | 52.5¢/bbl |
| Kerosene (except kerosene-type jet fuel): | |||
| 2710.19.24.00 | Motor fuel | bbl | 52.5¢/bbl |
| 2710.19.25.00 | Motor fuel blending stock | bbl | 52.5¢/bbl |
| 2710.19.26.00 | Kerosene (except kerosene-type jet fuel | bbl | 10.5¢/bbl |
| Lubricating oils and greases, with or without additives: | |||
| 2710.19.30 | Oils | 84¢/bbl | |
| 2710.19.30.10 | Aviation engine lubricating oils | bbl | |
| 2710.19.30.20 | Automotive, diesel or marine engine lubricating oils | bbl | |
| 2710.19.30.30 | Turbine lubricating oil, including marine | bbl | |
| 2710.19.30.40 | Automotive gear oils | bbl | |
| 2710.19.30.50 | Steam cylinder oils | bbl | |
| 2710.19.30.70 | Quenching or cutting oils | bbl | |
| 2710.19.30.80 | Other | bbl | |
| Greases: | |||
| 2710.19.35.00 | Containing not over 10 percent by weight of salts of fatty acids of animal (including marine animal) or vegetable origin | kg | 5.8% |
| 2710.19.40.00 | Other | kg | 1.3¢/kg + 5.7% |
| Other: | |||
| 2710.19.45 | Mixtures of hydrocarbons not elsewhere specified or included, which contain by weight not over 50 percent of any single hydrocarbon compound | 10.5¢/bbl | |
| White mineral oil: | |||
| 2710.19.45.30 | Medicinal grade | bbl | |
| 2710.19.45.40 | Other | bbl | |
| 2710.19.45.45 | Insulating or transformer oils | bbl | |
| 2710.19.45.90 | Other | bbl | |
| 2710.19.90.00 | Other | kg/liters | 7% |
| 2710.20 | Petroleum oils and oils obtained from bituminous minerals (other than crude) and preparations not elsewhere specified or included containing by weight 70 percent or more of petroleum oils or of oils obtained from bituminous minerals, these oils being the basic constituents of the preparations, containing biodiesel, other than waste oils: | ||
| Distillate and residual fuel oils (including blended fuel oils): | |||
| 2710.20.05 | Testing under 25 degrees A.P.I. | 5.25¢/bbl | |
| 2710.20.05.10 | Having a Saybolt Universal viscosity at 37.8˚C of 45 seconds or more but not more than 125 seconds (No. 4-type fuel oils) | bbl | |
| 2710.20.05.20 | Having a Saybolt Universal viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils) | bbl | |
| 2710.20.05.50 | Other | bbl | |
| 2710.20.10 | Testing 25 degrees A.P.I. or more | 10.5¢/bbl | |
| Having a Saybolt Universal viscosity at 37.8˚C of less than 45 seconds (light fuel oils): | |||
| Fuel oils Nos. 2 and 3: | |||
| Diesel oil: | |||
| 2710.20.10.02 | Containing not more than 15 ppm of sulfur | bbl | |
| 2710.20.10.03 | Containing more than 15 ppm but not more than 500 ppm of sulfur | bbl | |
| 2710.20.10.04 | Containing more than 500 ppm of sulfur | bbl | |
| Other: | |||
| 2710.20.10.05 | Containing not more than 15 ppm of sulfur | bbl | |
| 2710.20.10.07 | Containing more than 15 ppm but not more than 500 ppm of sulfur | bbl | |
| 2710.20.10.08 | Containing more than 500 ppm of sulfur | bbl | |
| Other: | |||
| 2710.20.10.11 | Containing not more than 15 ppm of sulfur | bbl | |
| 2710.20.10.13 | Containing more than 15 ppm but not more than 500 ppm of sulfur | bbl | |
| 2710.20.10.14 | Containing more than 500 ppm of sulfur | bbl | |
| Having a Saybolt Universal viscosity at 37.8˚C of 45 seconds or more but not more than 125 seconds (No. 4-type fuel oils): | |||
| 2710.20.10.15 | Containing not more than 500 ppm of sulfur | bbl | |
| 2710.20.10.25 | Containing more than 500 ppm of sulfur | bbl | |
| 2710.20.10.50 | Having a Saybolt Universal viscosity at 37.8˚C of more than 125 seconds (heavy fuel oils) | bbl | |
| 2710.20.15.00 | Kerosene-type jet fuel, motor fuel or motor fuel blending stock | bbl | 52.5¢/bbl |
| 2710.20.25.00 | Kerosene (except kerosene-type jet fuel, motor fuel or motor fuel blending stock) | bbl | 10.5¢/bbl |
| Waste oils: | |||
| 2710.91.00 | Containing polychlorinated biphenyls (PCBs), polychlorinated terphenyls (PCTs) or polybrominated biphenyls (PBBs) | 10.5¢/bbl | |
| 2710.91.00.10 | Containing polychlorinated biphenyls (PCBs) at a concentration level of 50 mg/kg or more | bbl | |
| 2710.91.00.50 | Other, containing polychlorinated terphenyls (PCTs) or polybrominated biphenyls (PBBs), whether or not also containing polychlorinated biphenyls (PCBs) at a concentration level of less than 50 mg/kg | bbl | |
| 2710.99 | Other: | ||
| Wastes of distillate and residual fuel oils (whether or not blended): | |||
| 2710.99.05.00 | Testing under 25 degrees A.P.I. | bbl | 5.25¢/bbl |
| 2710.99.10.00 | Testing 25 degrees A.P.I. or more | bbl | 10.5¢/bbl |
| 2710.99.16.00 | Wastes of motor fuel or of motor fuel blending stock | bbl | 52.5¢/bbl |
| 2710.99.21.00 | Wastes of kerosene or naphthas | bbl | 10.5¢/bbl |
| Wastes of lubricating oils and greases (whether or not containing additives): | |||
| 2710.99.31.00 | Of oils | bbl | 84¢/bbl |
| Of greases: | |||
| 2710.99.32.00 | Containing not over 10 percent by weight of salts of fatty acids of animal (including marine animal) or vegetable origin | kg | 5.8% |
| 2710.99.39.00 | Other | kg | 1.3¢/kg + 5.7% |
| Other: | |||
| 2710.99.45.00 | Mixtures of hydrocarbons not elsewhere specified or included, which contain not over 50 percent of any single hydrocarbon compound | bbl | 10.5¢/bbl |
| 2710.99.90.00 | Other | kg/liters | 7% |
Common paperwork mistakes with heading 2710
- The invoice shows the exporter's own code. Only the first six digits are shared worldwide; the US number has ten. Check every line against the list above.
- The quantity is in the wrong unit. These lines report quantity in bbl or kg/liters or kg, which may not match the invoice's cartons, sets or pieces.
- The packing list and the bill of lading disagree on cartons or gross weight, which can lead to holds and exams.
- The manufacturer's name and address are missing, so the MID cannot be built from the documents.
Look up any ten-digit number, or read the guide to invoice and packing list mismatches.
Check the whole shipment, not one number
FreightProof reads the invoice, packing list and bill of lading together, validates every HTS number and container, builds the MIDs and flags what does not match — in about two minutes.
Data: Harmonized Tariff Schedule of the United States, US International Trade Commission. Rates are for information only.